LR3 Talk about the Land Rover LR3 within.
Sponsored by:
Sponsored by:

Keyless entry help

Old Feb 28, 2011 | 03:45 PM
  #1  
cblake's Avatar
Thread Starter
|
4th Gear
Joined: Sep 2009
Posts: 4
Likes: 0
Default Keyless entry help

Recently, both of my remotes stopped working. After some searching, I came across the repair to the green/white wire on the passenger sill plate area. I checked that, and it was all good. So I found the receiver in the headliner and checked for voltage going to it, and it's good as well. Of course, I can't check the module, but it does have 12v going into it. Does this sound like a bad receiver, or is there something else to check out?

Thanks
 
Reply
Old Mar 1, 2011 | 11:37 PM
  #2  
RoverMasterTech's Avatar
Recovery Vehicle
Joined: May 2008
Posts: 811
Likes: 78
From: Howell, NJ
Default

pull on 2 of the green wire on the splice under the pass sill, it will fall right apart. It has enough left to carry voltage, but cant carry any current.
 
Reply
Old Mar 2, 2011 | 08:59 AM
  #3  
cblake's Avatar
Thread Starter
|
4th Gear
Joined: Sep 2009
Posts: 4
Likes: 0
Default

I've tried that. The connection is solid and no corrosion at all. I tested the transmitters and they are both working fine.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frank4
Discovery II
4
Mar 21, 2014 05:21 AM
stankonia20
General Range Rover Discussion - Archived
4
May 25, 2010 06:37 AM
jnance50
General Range Rover Discussion - Archived
1
Jan 24, 2010 09:29 AM
FORDSTANGER
Discovery II
12
Aug 9, 2005 01:00 PM
pvalianatos
General Tech Help
4
Mar 12, 2005 05:20 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:58 AM.