LR3 Talk about the Land Rover LR3 within.
Sponsored by:
Sponsored by:

New to Land Rovers and the one I have wont move

Thread Tools
 
Search this Thread
 
  #11  
Old 10-30-2018, 08:50 PM
livfreely's Avatar
Drifting
Thread Starter
Join Date: Oct 2018
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ArmyRover
Lol get the gap tool it will pay off. Both if of mine are over 150k and going strong.

I almost wonder if it's the transfer case module. Behind the battery up by the firewall is a silver module with three connectors. Pull them loose and look for corrosion. If it's there pic up some electrical connection cleaner and a soft bristle toothbrush to clean it up cost it with dielectric grease reconnect. Than do a hard reset and give it a go

Thank you for all your help. There is some tom foolery going on with my LR. There is water in the carpets of the front passenger side, and rear passenger side. Someone might have spilt a drink, or left the windows down while it was waiting for auction. I will post some more pics tomorrow. It is a great looking vehicle. The carfax shows a minor rear end accident. I searched the rear frame, and nothing is bent/off. It does have two Nitto Terra grapplers on the rear, and two different tires on the front. My estimation is it has been sitting for possibly a year or so???

Again thanks for your replies.
 
  #12  
Old 10-30-2018, 08:52 PM
livfreely's Avatar
Drifting
Thread Starter
Join Date: Oct 2018
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by stillruns


I’m in Nashville as well and would not recomment the dealer. There are a few indy shops around that would likely be your best bet. The folks on this forum are far more educated than any shop. Let them help first and go from there.
That is what I was afraid of. I am in Clarksville, and there are a few off road shops like Motofix that I might tryout. Sadly nothing dedicated to the LR's.
 
  #13  
Old 10-30-2018, 09:14 PM
stillruns's Avatar
Pro Wrench
Join Date: Mar 2016
Location: Bham
Posts: 1,981
Received 388 Likes on 315 Posts
Default

Originally Posted by livfreely
That is what I was afraid of. I am in Clarksville, and there are a few off road shops like Motofix that I might tryout. Sadly nothing dedicated to the LR's.
Ed’s British 4x4 is a reputable shop here. There is another one that slips my mind. I’ll look for it and post here.
 
  #14  
Old 10-30-2018, 10:17 PM
ArmyRover's Avatar
Super Moderator
Join Date: Jun 2008
Location: Augusta, GA
Posts: 9,832
Received 1,481 Likes on 1,209 Posts
Default

Water ingress where you describe is somewhat common. Definitely check the tcm module. Also do what you can to dry out the passenger side water can stand in the rocker and play hell with electrical stuff as the main harness is in there.

Sunroof drains or windshield cowl leaks or a pillar trim can cause the water
 
  #15  
Old 10-31-2018, 04:46 PM
kenneypj1's Avatar
Three Wheeling
Join Date: Aug 2018
Posts: 60
Likes: 0
Received 1 Like on 1 Post
Default

Once you get the GAP tool find the live value for the transmission output shaft and see if it is spinning when the transmission is engaged
 
  #16  
Old 10-31-2018, 05:49 PM
livfreely's Avatar
Drifting
Thread Starter
Join Date: Oct 2018
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

I checked the transfer case module. Cleaned it up, and the engine light came off!

The transmission does still not engage

BUT I got some new messages on my display.


Got to refill my coolant

Thinking

Done Thinking

Low tyre pressure



 
  #17  
Old 10-31-2018, 05:53 PM
livfreely's Avatar
Drifting
Thread Starter
Join Date: Oct 2018
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

I can go through all the gears and the display still reads them. When I put it back in P I hear a “slight grind” noise. Still no engagement through any gear.

here is how low it sits.



 
  #18  
Old 10-31-2018, 05:56 PM
livfreely's Avatar
Drifting
Thread Starter
Join Date: Oct 2018
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

Here is the fuse box. I think I’m missing some?






 
  #19  
Old 10-31-2018, 05:56 PM
ArmyRover's Avatar
Super Moderator
Join Date: Jun 2008
Location: Augusta, GA
Posts: 9,832
Received 1,481 Likes on 1,209 Posts
Default

any water in the passenger side rocker channel where the harness lays?
 
  #20  
Old 10-31-2018, 06:07 PM
livfreely's Avatar
Drifting
Thread Starter
Join Date: Oct 2018
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ArmyRover
any water in the passenger side rocker channel where the harness lays?

water on on the passenger side floor going in to the rear passenger side floor. I have shop towels soaking the water up.
 


Quick Reply: New to Land Rovers and the one I have wont move



All times are GMT -5. The time now is 04:34 PM.