What did you do to your LR3 today?
#133
Well, I just got my first LR3 and while I'm waiting to get it registered I went ahead and changed the transfer case fluid, changed the rear diff fluid, installed some all-weather mats, changed the air filter, changed the pollen filter, and (though this has been over a few days) polished, waxed, and used Gtechniq C4 to restore the black plastic trim (seems to work very well BTW, but time will tell how it holds up). I've been busy, though nothing too serious yet.
You should probably replace the front breather. They make a replacement one or you can just cut the top off it and put a fuel filter on the end of it.
The one that comes with it plugs up (its way too small) then back pressure builds up and will either cause seal leaks or can blow out the plastic tube making a huge mess. Its a 4 minute job.
Differential breather cap
Also the consensus seems to be to fill the rear and front differential to the bottom of the fill plugs and not by the directions which calls for less.
The following users liked this post:
markmontana (09-08-2015)
#134
#136
Having Curt Class III trailer hitch installed. Four bolts into the frame is much better than one tiny piece of metal in a slot.
Ordered used rear lower tailgate to replace the one slammed by my boat when the LR hitch with the tiny piece of metal in a slot disengaged itself from the rest of the vehicle, causing my boat to slam into the LR.
Ordered used rear lower tailgate to replace the one slammed by my boat when the LR hitch with the tiny piece of metal in a slot disengaged itself from the rest of the vehicle, causing my boat to slam into the LR.
#137
Having Curt Class III trailer hitch installed. Four bolts into the frame is much better than one tiny piece of metal in a slot.
Ordered used rear lower tailgate to replace the one slammed by my boat when the LR hitch with the tiny piece of metal in a slot disengaged itself from the rest of the vehicle, causing my boat to slam into the LR.
Ordered used rear lower tailgate to replace the one slammed by my boat when the LR hitch with the tiny piece of metal in a slot disengaged itself from the rest of the vehicle, causing my boat to slam into the LR.
Mine is stuck on, I can't get it off.