When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I know it’s hard to find tire and wheel combos for our vehicles but I found a new setup that works great.
Not sure why these pics are side ways but you get the idea. Found a set of Fuel 18” off road wheels (rated at 2200 lbs each, more than the factory LR wheels) and Nitto Ridge Grapplers 275/65/18. Had to use some 30mm spacers and the usual frame horns and plastic trimming. I can include links for all the pieces if anyone is interested. The wheels were only $250 each from Discount Tire Direct on eBay and I found the tires on eBay as well for around $175 each. A total steal! This LR4 is a 2012. I also have a custom wheel setup on my 2008 LR3.
here is how the new 255-65-19 (32 inches) looks with our 3.0 front kit shown in off road mode and then normal mode.
This is a good tire option as the narrower stock width tire fits the lr4 well.
Check our links below to order a set.
Hi! Which of your lift kits gives the equivalent lift as when I set the ride height to the high setting? 1.5"? I'm trying to decide whether to buy the 1.5 or 2.5 kit and I'd like to get a visual of what it will look like at "normal" height after the lift. Thanks!
I just put same tires on my 2013 LR4, having just out proline 2inch plus Johnson Rods on. However at full turn I am getting rubbing in front wheel wells (near back of well on the frame). It’s about a 1/2 inch of rub.
I’m putting on 30mm spacers on in the hope that this solves it.
dis you have any rubbing and if yes, how did you address? Or was 3” lift all the difference (1inch more than what I have on now).
I have the same rubbing and was going to do the 30mm spacers as well. (makes no difference with lift kit). Will the 30mm spacers be enough? Will I have any issues with the original lug nuts poking through the spacers? Ill let you know how it turns out of no one else has said it yet??
09-05-2022, 03:30 PM
