Hi Alex....I'll be doing the front cover/oil pump + water pump job on my 03 4.6 soon. following your set of instructions + RAVE.

Question on your rig...did you have to remove the transmission crossmember support to finagle the oil pan off/out?

Thanks Alex. Man, I did not respond 6 years ago. Nice to see you are still working on Landys. Cheers, Kevin

Alex-I have a few questions about your maintance list.

1. Which synethic gear oil do you suggest?
2. Where can I buy the brass differential fill plugs from?
3. What is the name of the "green coolant"?
4. Same goes for MAF cleaner.

Thank you!!

hi Alex. my name is Wayne, I would like to know if you own a scan tool that you would recommend to scan and test all the systems on a 1998 p38 range rover 4.6 hse. i'm have trouble finding one that will do rovers that old as well as other u.s. vehicles. any help or suggestions would be appreciated. thanks.

Hi Alex,
I received my gauges today, both are mechanical oil press & water temp. The water temp has a 3/8" fitting. Looks like I am going to have to drill and tap the rad hose tee. Speaking of rad hose tee, you used a 32mm/1-1/4, I figured tje upper hose was 38mm/1-1/2". Did that tee fit ok or would you recommend the 38mm?

Thanks Alex! I am unimpressed with the 150amp alternator I have. I am going to go back to the 130 amp.

Thanks for the advice as always!

Hey Alex,

I have a question about running your electric fan. I put in a 150amp alternator from ebay, but it is noisey on start up. I am considering going back to the stock 130 amp alternator. Is that what you are running? I have a GTO Fan in their that has two fans one 13" and one 15". They pull less than 8volts each so I am wondering if you are finding the 130 amp alternator adequate for your taurus fan that is powerful.

Tony

9282309613

I have a couple questions before i dedicate my energy to replacing my 03 cdl from an 04. any chance you could give me a call or i could call you?

Alex, your mod list says you did HID mod with projectors. Got any pics of that?

I've got some projectors, just need to get brave enough to open up my headlights.