When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Handbrake-issue after L98 engine/trans/transfer case swap
Hello
I have swapped in a LT98 engine (Chevrolet Corvette 1986) with a matching Chevrolet transmission 700r4 (4L60) and a Chevrolet 4wd transfer case.
Problem now:
The stock handbrake-drum does not fit anymore.
I guess all of you that swapped in a LS or similar engine might have experienced the same challenge.
or maybe some of you converted the handbrake for other reasons.
How did you solve it?
I thought of a conversion to a disc-handbrake conversion Kit offered from X ENG
see here:
https://maltings4x4store.co.uk/products/x-eng-discovery-1-and-2-handbrake-disc-brake-conversion.html?srsltid=AfmBOoon5K8VtZiFC8y8WQI3Ao 03nUmdik-O_-sUdrUweMTOyQyUQKTx
disc handbrake conversion
Perhaps also an electronic parking brake could be a solution?
Handbrake-issue after L98 engine/trans/transfer case swap
