PCV valve question and lean codes
Thread Starter
|
3rd Gear
Joined: Jan 2025
Posts: 3
Likes: 0
From: South Florida
PCV valve question and lean codes
I guess back to basics.
My daughter has a 2008 RRS HSE with some lean codes.
When I put the PCV valve up to my Mouth, there is no resistance when I suck or blow into it, Is this right on this car?
If i do a check on the vacuum side of the PCV valve while the car is running, what should i expect for a result?
On every other car even the slightest amount of vacuum would close the cheapest of valves. I am new to RR.
Bought a brand new Beck/Arnley off of Amazon and same thing, I can suck and blow straight through, and when i put my finger over it there is a click.
My daughter has a 2008 RRS HSE with some lean codes.
When I put the PCV valve up to my Mouth, there is no resistance when I suck or blow into it, Is this right on this car?
If i do a check on the vacuum side of the PCV valve while the car is running, what should i expect for a result?
On every other car even the slightest amount of vacuum would close the cheapest of valves. I am new to RR.
Bought a brand new Beck/Arnley off of Amazon and same thing, I can suck and blow straight through, and when i put my finger over it there is a click.
Thread
Thread Starter
Forum
Replies
Last Post
Packer2015
General Range Rover Discussion - Archived
0
Apr 5, 2022 10:52 AM
