Retired - Private For Sale/Trade Classifieds Sell or Trade your stuff for free! Anything for sale by private owner. NO COMMERCIAL POSTS!

Prepped by Extinct: Low mile 03 HSE

 
Thread Tools
 
Search this Thread
 
Old Dec 15, 2020 | 10:00 AM
  #1  
Extinct's Avatar
Thread Starter
|
Baja
Joined: Feb 2013
Posts: 5,283
Likes: 1,813
From: Lynchburg VA
Default Prepped by Extinct: Low mile 03 HSE

I've had this truck about 9 months now, taking my time doing the Extinct upfits/corrections/restoration work to make it as clean and reliable as possible. As far as I can tell it was a two owner vehicle before I got it, both US Servicemen. The original owner took it all over the world with him on deployments, it has been to Sicily, Hawaii, the Pacific Northwest, and eventually wound up in Florida (hence the "Florida window tint"). Somewhere along the way he had the frame treated/painted and it is the best looking frame I have ever seen (pics below). It also came with the complete service history from the moment it was purchased including the original window sticker and was maintained it in tip top shape including the interior trim and upholstery. It has almost every available option except the dealer installed DVD player including the original GPS radio, SLS rear suspension, park distance control and factory pushbar and auxiliary high beams - all 100% functional as intended. It had a factory dog guard installed at some point, I don't have the guard but the mounts are still installed. Of course it has the factory rubber floor mats and cargo mat and all the normal HSE equipment including the winter package and high end HK sound system. Due to the excellent service history I believe it has not experienced an overheat event and all evidence suggest the heads have never been off. The engine did have a slight tick when hot so I have pinned the cylinders which eliminated the tick. Stainless screws and safety wire used for the cylinder pinning for permanent installation. Also as part of my upfit/restoration work I have done the following work and replaced the following parts:
  1. Complete cooling system replacement, new hoses, bottle, water pump, radiator, and the Extinct inline thermostat mod.
  2. New valve cover gaskets and PCV mod
  3. All door panels removed and window tracks lubricated to prevent regulator breakage.
  4. Rebuilt PS pump
  5. New idler pulley bearings
  6. New wiring looms everywhere
  7. New starter
  8. Rebuilt master cylinder
  9. Removed and resealed sun roof pans and sun roof motors
  10. New headliner with radiant barrier installed
  11. New shifter boots
  12. New exhaust gaskets
  13. Transfer case sight glass installed
  14. Extinct SAI tubing mod (see pics)
  15. Extinct CPS cover mod (CPS is new in 2019)
The truck has just over 102k on the clock now and everything works as it should. Paint is in very good condition for the age of the truck with minimal rock chips and scratches and only the slightest hint of the beginning of roof fade near the sunroofs. One of the previous owners pulled the plastic fender flares and front mud flaps to give it a bit more urban/clean look. Goodyear LS2 tires have 7-8/32 tread or about 75% of the original 12/32 when new. Oil pressure was checked and runs 22 psi hot at idle, 50 ish at rpm. Video available. In addition to the work I have put in to it, the previous owner had replaced the following parts in the last five years, all documented with receipts:
  1. New Ball Joints
  2. New Battery 2019
  3. New Fuel Pump Oct 2019
  4. New CPS Oct 2019
  5. Upper Radiator Hoses - 74k
  6. Steering Box - 77k
  7. Rear air springs and compressor - 77k
  8. Rear brakes - 82k
  9. Plugs and wires - 83k
  10. Lifters - 85k
  11. Front brakes - 85k
  12. Oxygen sensors - 93k
I will likely try to get it on BAT or Cars and Bids but am having some difficulty with their picture uploader so not there yet.

Truck is located in Lynchburg VA, first $13k takes it home.





























Engine running







 

Last edited by Extinct; Dec 16, 2020 at 07:36 PM. Reason: Forgot new starter
Old Dec 16, 2020 | 03:06 AM
  #2  
JUKE179r's Avatar
Camel Trophy
Joined: May 2016
Posts: 3,969
Likes: 859
From: Britainistan, UK
Default

Great looking Disco 2 @Extinct !
GLWYS mate!
 
Old Dec 16, 2020 | 07:23 AM
  #3  
stillruns's Avatar
Pro Wrench
Joined: Mar 2016
Posts: 1,992
Likes: 399
From: Bham
Default

In that last photo you literally “threw in the towel!”
 
Old Dec 16, 2020 | 09:39 AM
  #4  
tnrangerover's Avatar
Rock Crawling
Joined: Oct 2020
Posts: 319
Likes: 151
From: Nashville, TN
Default

What's the SAI mod? I couldn't find it in your thread history.


Nice Looking truck. Definitely worth the asking price with all the work done.
 
Old Dec 16, 2020 | 11:37 AM
  #5  
mollusc's Avatar
Camel Trophy
Joined: Nov 2015
Posts: 3,560
Likes: 834
From: Staten Island, NY
Default

Originally Posted by tnrangerover
What's the SAI mod? I couldn't find it in your thread history.
SAI mod could be replacing the original SAI foam filter with a replaceable/washable cone filter. I think it's in the D2 stickies.
 
Old Dec 16, 2020 | 06:26 PM
  #6  
Extinct's Avatar
Thread Starter
|
Baja
Joined: Feb 2013
Posts: 5,283
Likes: 1,813
From: Lynchburg VA
Default

Sai Mod is the SAI hoses/tubing. I replace the stainless pipe with nylon hoses and PP fittings. Makes it easier to service coils and other wiring in the back of the engine compartment. You can see it in the photos.
 
Old Dec 17, 2020 | 12:24 PM
  #7  
mln01's Avatar
Camel Trophy
Joined: Dec 2009
Posts: 3,885
Likes: 955
From: Charlotte
Default

Wow. Looks like a great truck. I'm not your buyer, but I know how careful and thorough you are. I expect that whoever buys it will be very happy with it, although things can go wrong unexpectedly with any 18-year-old vehicle.

A couple more questions -- What is the transfer case sight glass mod, and what is the Extinct CPS cover mod, please? Thanks.
 

Last edited by mln01; Dec 17, 2020 at 12:38 PM.
Old Dec 17, 2020 | 08:18 PM
  #8  
Extinct's Avatar
Thread Starter
|
Baja
Joined: Feb 2013
Posts: 5,283
Likes: 1,813
From: Lynchburg VA
Default

Transfer case sight glass - replaced transfer case level plug with sigh glass, no more removing to check level. CPS cover mod - CPS cover wrapped in aluminum foil to reflect radiant heat. Never have another failed CPS.
 
Old Dec 18, 2020 | 05:08 AM
  #9  
mln01's Avatar
Camel Trophy
Joined: Dec 2009
Posts: 3,885
Likes: 955
From: Charlotte
Default

Okay, but where do you get the sight glass plug?
 
Old Dec 18, 2020 | 05:49 PM
  #10  
Extinct's Avatar
Thread Starter
|
Baja
Joined: Feb 2013
Posts: 5,283
Likes: 1,813
From: Lynchburg VA
Default

I can provide one, pm or email me for details.
 



All times are GMT -5. The time now is 10:20 AM.