I love it. Bumper is great so far.

 

Pulling it off as soon as I'm done typing for finish welding, light tabs & finish work.......wrestling with color I want, if I go straight black, it'll just disappear...

Mean while.....

When those parts your shipping to Norway absolutely, positively need to ship out under 4 pounds......I'm just under 3!



Giddy up!

 

You do realize at some point in time I am going to show up on your door step with a MGB and a 8.8" rear axle right?

 

No problem, we could bang that out in an afternoon.

So.....back on the bench, all welded up and 80% detailed......need to hit the tube work tomorrow or the next day.......

Upper bumper.....



Corners filled and radiuses finished.....
Also added a back gusset, better visual under the body line & a little extra beef....





Miller time.............

 

Damn that is some nice work.


Going to take you up on that. We will just need to narrow it, 4 link it and maybe a quick tub job for clearance. I'll bring beer and steak of course...

 

Have it narrowed in advance as you'll need shafts as well.......bring a 4 link kit, bags or coils.....that's all the fun part! Tub's are typically sheet metal, while I can work with sheet metal, I don't have a lot of shop tooling for it.

As far as your other comment.......it's what I do.

Thanks!

 

When I get to that spot we will talk my friend


I aspire to do work 25% as good as you lol

 

Soooooo........jumped thru numerous hoops and banged it out and did the quickie (who doesn't like a quickie) install.......

Paint......ugg, typically I like bedliner, but this would make it invisible...so I went with hammered black which is usually gray......but it looked bronze, so I went with the other hammered black......I need a beer......which was lighter than the bronze but did end up darkening up........so for now, I guess I'm cool with it......









Kept the fogs for the Euro Trash look...........Pretty much digging it, it's as light as the stock bumper with the hoop added. This I like, light, strong, recovery, and most importantly..........DONE.......Time to rip into her butt!!!

 

Over all goal was to be clean and non-cookie cutter.......pretty sure I pulled that off....

 

Doug, what I showed was the best pic's I had.......