Defender V8 Stock Exhaust Question
4th Gear
Joined: Oct 2025
Posts: 4
Likes: 4
Oh so it’s part of dynamic, do you have to have it in dynamic drive mode to be able to control the valves?
Do you happen to recall the number or name of which CCF was added to obtain that icon?
I have dynamic mode enabled in mine, but would need to go in and find out if it’s available in my settings or not to even enable.
Do you happen to recall the number or name of which CCF was added to obtain that icon?
I have dynamic mode enabled in mine, but would need to go in and find out if it’s available in my settings or not to even enable.
MultiCAN-748 Active Exhaust Map - Installed
MultiCAN-688 ExhaustExhaus- Dual exhaust if you have a V8
MultiCAN-675 ActiveExhaustButton Type - Select Soft
Side note: I updated the Gap Tool G4 and my SV Dynamic-i screen / Active Exhaust Button changed form SV to the OCTA Diamond screen / Active Exhaust Button.
Honestly, I like the SV Dynamic-i screen better. Especially since my Defender is not a OCTA. I also find the SV Logo "Aesthetically Pleasing."
Last edited by DEFENDER P525; Oct 27, 2025 at 07:40 PM.
Mudding
Joined: May 2022
Posts: 134
Likes: 48
From: Illinois
I like the software option and will give this a try.
Three Wheeling
Joined: Jun 2022
Posts: 64
Likes: 54
I would think that this would produce the same result – you’re just doing it via coding instead of manually
Three Wheeling
Joined: Jan 2024
Posts: 57
Likes: 26
From: CO
Oh so it’s part of dynamic, do you have to have it in dynamic drive mode to be able to control the valves?
Do you happen to recall the number or name of which CCF was added to obtain that icon?
I have dynamic mode enabled in mine, but would need to go in and find out if it’s available in my settings or not to even enable.
Do you happen to recall the number or name of which CCF was added to obtain that icon?
I have dynamic mode enabled in mine, but would need to go in and find out if it’s available in my settings or not to even enable.
Drifting
Joined: Sep 2025
Posts: 26
Likes: 2
This is the Active Exhaust icon installed and functional. I used the IID Gap Tool G4. In this photo the valves are closed
In this photo the valves are opened and the stock exhaust with a resonator delete - X-Pipe replaced it snaps crackles and pops!!! No need for an aftermarket cat back system.[/QUOTE]
This is on a V8? OR P400/?
Thanks a lot.
8th Gear
Joined: Nov 2025
Posts: 8
Likes: 7
This is the Active Exhaust icon installed and functional. I used the IID Gap Tool G4. In this photo the valves are closed
In this photo the valves are opened and the stock exhaust with a resonator delete - X-Pipe replaced it snaps crackles and pops!!! No need for an aftermarket cat back system.[/QUOTE]
how did you get this to display ? I have the settings enabled and the i dynamic config screen but can not find this anywhere
