When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cheers Nick, really helpful.
I have the large table and brackets ready to go. Just waiting some other components before installing over the next couple of weeks.
From what I can see the installation of the large table undermount will prevent the sunroof from opening more than 50% which is dissapointing, so it might be worth thinking about the smaller table if you havent already purchased yet, to allow the sunroof to open almost fully. I will report back once I install.
I did see someone had both the FR Rack and PR Ladder on Instagram without issue. The cool thing about the FR rack (short) is that the feet can go wherever to make room for other items that may use the factory rails.
I did see someone had both the FR Rack and PR Ladder on Instagram without issue. The cool thing about the FR rack (short) is that the feet can go wherever to make room for other items that may use the factory rails.
The short one should be fine since it attaches to the roof rails. I am trying to install the long rack and the PR ladder next week. We may need to modify the ladder’s base a bit.
The short one should be fine since it attaches to the roof rails. I am trying to install the long rack and the PR ladder next week. We may need to modify the ladder’s base a bit.
It'll be interesting to see how you wind up on this project, I am sure many are in the same boat as yourself. Good luck and make sure to take lots of pictures a long the way!
It'll be interesting to see how you wind up on this project, I am sure many are in the same boat as yourself. Good luck and make sure to take lots of pictures a long the way!
We ended up cutting the ladder’s base and bolting it to the rack. It’s pretty solid in there and it looks fine to me. I really like the end result.
