New Defender Au Spec Bullbar
#1
New Defender Au Spec Bullbar
Hi all,
I have Defender 110 P300 and I've been looking to get an AU Spec Bullbar for a while. The prices I've been quoted for them have made my consideration unjustified at $4,400 before shipping and another $1800 to ship from Aus to Northern California. Totaling $6,200 for the bar before duties. I've found a way to get the AU Spec OEM Bullbar for a landed cost of approx. $3k (pending final confirmation on shipping + duties) in Northern California. Wanted to see if there is anyone else that has been considering or wanting the same bar? Perhaps I should bring in more to try get economies of scale on shipping?
If this is something you've been considering let me know.
I have Defender 110 P300 and I've been looking to get an AU Spec Bullbar for a while. The prices I've been quoted for them have made my consideration unjustified at $4,400 before shipping and another $1800 to ship from Aus to Northern California. Totaling $6,200 for the bar before duties. I've found a way to get the AU Spec OEM Bullbar for a landed cost of approx. $3k (pending final confirmation on shipping + duties) in Northern California. Wanted to see if there is anyone else that has been considering or wanting the same bar? Perhaps I should bring in more to try get economies of scale on shipping?
If this is something you've been considering let me know.
#2
The following 2 users liked this post by nashvegas:
2OceansOverland (11-23-2022),
DefenderSISU (02-21-2023)
#3
Yeah, for me, it's the best option for front end protection as well as for winch / spotlight installation. I was driving behind a pickup truck on the freeway the other day and an empty paint tin flew out the back. Hit the front end of my defender which urged me to try find a way to get a AU spec bullbar here at a better price. The damage isn't too bad, but the bullbar definitely would have helped and the damage could have been worse. I'm going to finalize shipping and duties etc this week. Should have confirmed by early next week. Feel free to connect directly if you're interested? I'm pretty sure I'll be able to get landed in NorCal for $3k. Shipping from NorCal to anywhere else in US I'll leave at your own cost.
#4
The following users liked this post:
2OceansOverland (11-23-2022)
#5
I’m holding out for Lucky 8’s version. Likely will be cheaper here in the US and appears to be coming soon via their Facebook.
The OEM Bullbar (and winch) is laughably expensive. I want one but not for upwards of what, $10k installed? I see that as money that could be spent on actually going on adventures.
The OEM Bullbar (and winch) is laughably expensive. I want one but not for upwards of what, $10k installed? I see that as money that could be spent on actually going on adventures.
Last edited by EchorecT7E; 11-23-2022 at 12:44 PM.
The following 2 users liked this post by EchorecT7E:
2OceansOverland (11-23-2022),
inater (11-23-2022)
#6
#7
The following 2 users liked this post by DoctorofRocks:
2OceansOverland (11-23-2022),
Lnberger (11-23-2022)
#8
Yeah it seems a bit more rounded / less square on the top bar. I'm going to put my money where my mouth is and bring in 3 Au Spec bullbars. 1 for me and 2 for whoever else might want. My defender has air suspension so I'm not going to bring in the suspension kit. Seems as though those can be sourced locally quite easily. Also going to reuse my existing parking sensors. So will limit the kit to Camera Bezel; Bullbar; Mounting Bracket and Crush Cans. Hopefully it works out okay and landed cost comes to around the $3k mark. If anyone is interested in snagging the other two feel free to reach out directly - we can figure out when I have them in hand. If it works out and other folks want I'll be happy to help.
#9
Yeah it seems a bit more rounded / less square on the top bar. I'm going to put my money where my mouth is and bring in 3 Au Spec bullbars. 1 for me and 2 for whoever else might want. My defender has air suspension so I'm not going to bring in the suspension kit. Seems as though those can be sourced locally quite easily. Also going to reuse my existing parking sensors. So will limit the kit to Camera Bezel; Bullbar; Mounting Bracket and Crush Cans. Hopefully it works out okay and landed cost comes to around the $3k mark. If anyone is interested in snagging the other two feel free to reach out directly - we can figure out when I have them in hand. If it works out and other folks want I'll be happy to help.
further, are you planning on installing a winch with it?
The following users liked this post:
2OceansOverland (11-23-2022)
#10
The following users liked this post:
DefenderSISU (12-01-2022)