NEW Roof Rack "Voyager"
#1
The following users liked this post:
Corgi_Express (12-23-2020)
#6
1895.00 with ladder, Andy still working on ladder,
Temp positioned the rack this afternoon,
sealed mounting points with Silicon since (ya never can be to careful with LR products)
no fun with wet head liner,
my opinion "absolutely amazing"
will see what the noise is like but this is not my primary traveler and I accept noise inconvenience for FUNCTION.
Jon
Temp positioned the rack this afternoon,
sealed mounting points with Silicon since (ya never can be to careful with LR products)
no fun with wet head liner,
my opinion "absolutely amazing"
will see what the noise is like but this is not my primary traveler and I accept noise inconvenience for FUNCTION.
Jon
#9
Yes,
I mounted to Front runner first that I had previously on my LR4,
IMO not worth the dollar,
the rack from LR4 was longer than the D110 offered currently using existing rails.
Pic as below,
Beware the FR rack will affect greatly over head clearance and I experienced some radio interference as well.
The OEM rack an Voyager product allow for cutout over Fin thereby minimizing signal interference.
Not to mention the wind noise was horrible as reported by others over the forums, personally though I trade noise for function and it does not bother me.
My solution was installing the front LR4 wind break that I had never used.
IMO wind noise improved.
I mounted to Front runner first that I had previously on my LR4,
IMO not worth the dollar,
the rack from LR4 was longer than the D110 offered currently using existing rails.
Pic as below,
Beware the FR rack will affect greatly over head clearance and I experienced some radio interference as well.
The OEM rack an Voyager product allow for cutout over Fin thereby minimizing signal interference.
Not to mention the wind noise was horrible as reported by others over the forums, personally though I trade noise for function and it does not bother me.
My solution was installing the front LR4 wind break that I had never used.
IMO wind noise improved.
#10
Been looking for something lower profile than either the oem or frontrunner as well, and saw voyager a while ago but no info on their site about this. Was hoping arb would adapt their new base rack but no info from them. Will have to take a look at voyager again. I assume this is steel and a bit heavy? Wondering how I would attach things without t-slots as well. What do you plan to carry on there and how do you attach things?