NEW Roof Rack "Voyager"
#24
for what it’s worth. I’ve had my front runner on for two months or so now (front runner rails not LR) and there’s no radio interference even though it completely covers the fin.
just as a data data point
just as a data data point
The following users liked this post:
DefenderSISU (02-25-2022)
#25
How do you like it? I’m torn between the factory expedition rack and the larger frontrunner rack. Does it have the build quality to equal the vehicle? I’ve never seen a frontrunner rack in person.
#26
Sorry for asking again, but I haven’t been able to get any confirmation: does the voyager slot right into the t-slot of the oem roof rails? Do you have to remove the oem roof rail bolts that go into the roof of the car for any reason? I’m really hoping this just uses the t-slot in the existing roof rails given all the problems the frontrunner buyers are having with those bolts.
#27
Sorry for asking again, but I haven’t been able to get any confirmation: does the voyager slot right into the t-slot of the oem roof rails? Do you have to remove the oem roof rail bolts that go into the roof of the car for any reason? I’m really hoping this just uses the t-slot in the existing roof rails given all the problems the frontrunner buyers are having with those bolts.
#29
None at all. I read about those issues as well and I made sure I slowly loosened them. The worst part was removing the bolt covers from the rails. There is zero good info on the deep dark web on how to remove these so I ended up having to hammer a flat head screw driver straight down the back (short) edge until it was under the lip and then pried the covers off. The rail got chewed up a bit and the covers were destroyed. If you figure out a better way I’d love to hear about it.
The following users liked this post:
DefXBill (11-21-2021)