I've decided to get Vossen HF-5 20x9.5 (25mm offset) wheels and Falken AT3W in 275/55/r20. Anyone see any fitment issues with that combo? Anything else I need to think about when getting the Vossens?

 

essentially this look. trying to confirm if I need anything else before ordering these wheels with those tires: https://vossenwheels.com/galleries/l...series-hf-5-2/

 

For a while there, I tracked many of the combos trying to decide what I would go with. Yeah, I have some sort of compulsive disorder. Anyway, @DallasBBQ reported out the closest that you list. He had no rub, but also a 1" lift. So, ymmv. Ping him direct or PM because the 1" lift is likely rods which means he may have run without them.

 

thank you that's helpful! will reach out to him.

 

Anybody know what wheels these are?

 

Look to me like Vossen HF-5s. Not common, but a known upgrade.

Here's a link: https://vossenwheels.com/galleries/h...series-hf-5-3/

 

Anyone running a 285/55R20, stock, no rods or lift. Issues or rubbing? The popular 275/55R20 is slightly shorter than stock size. Thanks.

 

Lucky8 have posted a handy table for tire size and mods required to fit:
https://lucky8llc.com/blogs/lucky-8-...ire-size-guide

 

Has anybody put stock 255/60/20 tires on a 9.5" wide 20" rims? It's a stretch, but I wonder if anyone has first hand experience from it?

 

Am I reading this right that 33" tires that are 10.5" wide need no modifications at all? This would be like a 265/70/18 or 265/60/20