One year of ownership and mods
#1
One year of ownership and mods
After One year of ownership with 13,000 miles in different terrains, im still surprised with the defender's capabilities even without having the rear diff or terrain response 2.
Never had a fault, never broke down on me, everything just worked, but there are 2 disappointments.
Rattles are increasing daily, doors, seats, down, up, pillers and every where.
Modding the defender is just difficult and expensive, the aftermarket parts and accessories are just unjustifiably crazy expensive, I know with time when the hype dies down the prices will go down but im jealous at how the market adopted quickly to the ford bronco, with accessories being sold even when the car wasn't released.
My defender is a P400 SE eiger grey and below are my current mods.
previous mods:
Never had a fault, never broke down on me, everything just worked, but there are 2 disappointments.
Rattles are increasing daily, doors, seats, down, up, pillers and every where.
Modding the defender is just difficult and expensive, the aftermarket parts and accessories are just unjustifiably crazy expensive, I know with time when the hype dies down the prices will go down but im jealous at how the market adopted quickly to the ford bronco, with accessories being sold even when the car wasn't released.
My defender is a P400 SE eiger grey and below are my current mods.
- Evo Corse 18 inch (without brake conversion)
- BFG KO2 285/60/18
- lazer lamps grille kit
- headlight guards
- Extended wheel arch
- Interior lights
- rubber floor mats
previous mods:
- redbourne alston 20 inch wheels
- bfgoodrich ko2 275/55/20
- Cooper at3 275/65/18
- side box
- side ladder
- oem roof rack
- oem spare tire cover
Last edited by aao4473; 03-10-2022 at 12:34 AM.
The following 5 users liked this post by aao4473:
D90Hope (01-30-2022),
GrouseK9 (01-13-2022),
JustSean (01-14-2022),
Ludders54 (01-13-2022),
Mechano2020 (01-13-2022)
#2
The following users liked this post:
IrrationalCPA (01-16-2022)
#3
Well, I have to say that a second set or new set of wheels has not been on my radar, so forgive me if this is answered elsewhere. But might I get some details about these wheels and what it took to mount?!? Straight bolt on without modification? Good sources?
#4
Looks fantastic, @aao4473 !! Thanks for sharing. Posts & pics like that are why I'm on this forum!
Random comments & questions.
- Kudos to you for going back clean and removing the rack, lunchbox & ladder. Looks sharp! (Not that I dislike the other way, just that it looks "fresh").
-Are those the matt black or gloss black Evo Corse? Also, those the DakarZero? I see your other thread answered this.
- Speaking of the other thread, which spacers did your eventually install? The other thread said you were working that out.
- Love the lazer lights. How much of a PITA (Pain in the A...) was it to mount or did you hire it out?
- How beefy are those light guards? I have the Lucky8 version & prefer the style, but I'm skeptical about how substantial they will actually be when needed. Doubt mine will take a bird at 70mph.
Random comments & questions.
- Kudos to you for going back clean and removing the rack, lunchbox & ladder. Looks sharp! (Not that I dislike the other way, just that it looks "fresh").
-
- Speaking of the other thread, which spacers did your eventually install? The other thread said you were working that out.
- Love the lazer lights. How much of a PITA (Pain in the A...) was it to mount or did you hire it out?
- How beefy are those light guards? I have the Lucky8 version & prefer the style, but I'm skeptical about how substantial they will actually be when needed. Doubt mine will take a bird at 70mph.
Last edited by GrouseK9; 01-13-2022 at 08:26 AM.
#6
The following users liked this post:
Kev M (01-13-2022)
#7
Short version, he grinded off some material of the factory brakes. Full thread here:https://landroverforums.com/forum/20...r-zero-109068/
Thanks for saving my life!
Last edited by Kev M; 01-13-2022 at 11:21 AM.
The following users liked this post:
Nanozic (01-13-2022)
#8
Looks fantastic, @aao4473 !! Thanks for sharing. Posts & pics like that are why I'm on this forum!
Random comments & questions.
- Kudos to you for going back clean and removing the rack, lunchbox & ladder. Looks sharp! (Not that I dislike the other way, just that it looks "fresh").
-Are those the matt black or gloss black Evo Corse? Also, those the DakarZero? I see your other thread answered this.
- Speaking of the other thread, which spacers did your eventually install? The other thread said you were working that out.
- Love the lazer lights. How much of a PITA (Pain in the A...) was it to mount or did you hire it out?
- How beefy are those light guards? I have the Lucky8 version & prefer the style, but I'm skeptical about how substantial they will actually be when needed. Doubt mine will take a bird at 70mph.
Random comments & questions.
- Kudos to you for going back clean and removing the rack, lunchbox & ladder. Looks sharp! (Not that I dislike the other way, just that it looks "fresh").
-
- Speaking of the other thread, which spacers did your eventually install? The other thread said you were working that out.
- Love the lazer lights. How much of a PITA (Pain in the A...) was it to mount or did you hire it out?
- How beefy are those light guards? I have the Lucky8 version & prefer the style, but I'm skeptical about how substantial they will actually be when needed. Doubt mine will take a bird at 70mph.
as for the lazer lights, the kit comes with everything for installation, it took me 30 mins to install thankfully the defender has a positive and negative needles on the left side to install anything that needs power and a tunnel to pass through the wire inside also I opted for a switch instead of hooking them up with the high beam.
I bought the elite version which has spread more the regulars
those light guards use 3m stickers, just rub the headlight black border with an alcohol wipe and install them, they sit really well on the headlights, I saw the lucky8 ones, installing them is bit of hassle as you have to insure its not in the way of the light beam
Last edited by aao4473; 01-13-2022 at 11:08 AM.
The following users liked this post:
GrouseK9 (01-13-2022)
#9
been debating the lazer lamps. do yours have amber and white color selections?
Yeah so about the spacers, no spacers needed.
as for the lazer lights, the kit comes with everything for installation, it took me 30 mins to install thankfully the defender has a positive and negative needles on the left side to install anything that needs power and a tunnel to pass through the wire inside also I opted for a switch instead of hooking them up with the high beam.
I bought the elite version which has spread more the regulars
those light guards use 3m stickers, just rub the headlight black border with an alcohol wipe and install them, they sit really well on the headlights, I saw the lucky8 ones, installing them is bit of hassle as you have to insure its not in the way of the light beam
as for the lazer lights, the kit comes with everything for installation, it took me 30 mins to install thankfully the defender has a positive and negative needles on the left side to install anything that needs power and a tunnel to pass through the wire inside also I opted for a switch instead of hooking them up with the high beam.
I bought the elite version which has spread more the regulars
those light guards use 3m stickers, just rub the headlight black border with an alcohol wipe and install them, they sit really well on the headlights, I saw the lucky8 ones, installing them is bit of hassle as you have to insure its not in the way of the light beam