Anyone know of the best way to pull power and route wire to an amp and subs on a disco II that didn't come with the rear door subs?? I've been thinking of doing this for a while,but i'm not a stereo guy, and nobody around wants to touch my truck. I already have a custom fiberglass box, amp, and subs. Just need some advise on the wiring issues.

 

Rovers are not as easy to run wire thru. I ran a 2 Ga. wire down the passengers side, from the battery thru thr firewall under the carpet, under the plastic door sill plates then into the passenger side rear storage box. That is were the amp is mounted. I used a rear seatbelt bolt for a ground. Don't allow the wire to rest on any sharp metal or it could short out someday. I am going to wire in a capacitor near the amp.


Willie