my 98 disco1
#252
OK here is some preliminary bumper work, 2" box 1/8" wall this is (1) 10' stick not including where we cut off the ends, we still plan to add ends that go back to protect the front lower fender, I also wat to plate the top and eventually we will build a brush guard from tubing
Reglued mesh on grill with 2 part fast set plastic weld epoxy from Lowes it is a paste dries amber in color will see how it holds up
Reglued mesh on grill with 2 part fast set plastic weld epoxy from Lowes it is a paste dries amber in color will see how it holds up
Last edited by TOM R; 07-05-2014 at 12:17 PM.
#254
OK here is some preliminary bumper work, 2" box 1/8" wall this is (1) 10' stick not including where we cut off the ends, we still plan to add ends that go back to protect the front lower fender, I also wat to plate the top and eventually we will build a brush guard from tubing
Reglued mesh on grill with 2 part fast set plastic weld epoxy from Lowes it is a paste dries amber in color will see how it holds up
Reglued mesh on grill with 2 part fast set plastic weld epoxy from Lowes it is a paste dries amber in color will see how it holds up
#257
thanks, it is from a d2, there is plenty of room behind there for the depth of that socket, ground stud right there and gonna use the switched power for the trailer harness as i will not be installing a 6 or 7 way trailer plug, the wire i am tapping is purple just like the one on this socket, it is a lighted socket undecided if I want to make that work too
just traced it on the pannel and cut the hole smaller with a dremel, cut and bent a piece of sheetmetal as a strap across the back put a hole in it and reused the d2 mount screw with speed clip
it would have fit centered under the speaker but if I wire the rear work lite ont he roof rack I may put the switch next to this one
just traced it on the pannel and cut the hole smaller with a dremel, cut and bent a piece of sheetmetal as a strap across the back put a hole in it and reused the d2 mount screw with speed clip
it would have fit centered under the speaker but if I wire the rear work lite ont he roof rack I may put the switch next to this one