still no heads back from the machine shop claimed they broke the cutting tip for aluminum heads, so we pulled the front and middle carpets up cause the fronts were wet, rubberized foam underlayment was soaked dripping water soaked and rusting out the floor, removed all underlay and trashed it, cleaned the rust and sprayed it with rust killer and primer reinstalled dry carpets and floor mats, also replaced the door sill screws with stainless, reinstalled the ECM and washer bottle

 

Nice grill.. I opted the same but nixed the badge...

Chris

 

yeah the brush guard blocks it anyhow

 

floor rust and soaked padding I ripped out for the trash

 

 

this is what happens when you try to blow out the gas tank plastic vent tube

 

had a very productive day today got the oil pan, heads, intake, and almost everything else reassembled today about 6 hours working at a slow pace in this heat under a tarp canopy in dads driveway

all that is left is exhaust manifolds, cats and put the coils/plug wires on, gonna hit my favorite U pull in va for some p38 headers hopefully they got some more discos in

 

more pics, fresh heads

 

 

installed