While working in the bush I stopped the rover, on a very steep hill. when I came back could not persuade it to crank. Dragged it to a safe level spot with a dozer (about 500 m) and bypassed the neutral inhibitor switch and started the engine, however could not select any gear - selector moves back and forth, revs drop a little but no sign of movement, and if revs are not allowed to drop right back there is a slight grating when moving back to park, as if the locking pawl is dragging across something. ideas please...

 

CDL bumped into the "N" position also?

At least the engine cranks and runs.