Land Rover Forums - Land Rover Enthusiast Forum

Discovery I Talk about the Land Rover Discovery Series I within.

Am I missing something

Thread Tools
 
Search this Thread
 
Old Jul 9, 2016 | 09:51 AM
Share
  #1  
dsmeddy's Avatar
Thread Starter
|
Mudding
Joined: Aug 2012
Posts: 167
Likes: 2
From: Alpharetta Georgia
Default Am I missing something
I have 2 empty relay spots under my drivers seat. I haven't a clue what they are for. I do know my drivers seat wont adjust the front of my seat up nor down. Could this be why???


Missing relays for....?
 
Reply
0
Old Jul 9, 2016 | 10:59 AM
Share
  #2  
ihscouts's Avatar
Camel Trophy
Joined: Jan 2010
Posts: 4,245
Likes: 402
From: Traverse City MI
Default
Seat heat I believe for both front seats. If tilt isn't working it's usually the switch, hit that with WD40.
 
Reply
1
Old Jul 10, 2016 | 09:31 AM
Share
  #3  
fishEH's Avatar
Camel Trophy
Joined: Nov 2009
Posts: 4,079
Likes: 227
From: IL
Default
The seat switches can be taken out and cleaned relatively easily if you're careful keeping the parts contained.
 
Reply
1
Old Jul 11, 2016 | 09:34 AM
Share
  #4  
WaltNYC's Avatar
TReK
Joined: Mar 2010
Posts: 2,777
Likes: 625
From: NYC
Default
Very carefully indeed. There are a bunch of tiny springs and ball bearings in there.

Use a thin smear of dielectric grease on contacts when re-building.
 
Reply
0
Old Jul 11, 2016 | 06:20 PM
Share
  #5  
dsmeddy's Avatar
Thread Starter
|
Mudding
Joined: Aug 2012
Posts: 167
Likes: 2
From: Alpharetta Georgia
Default
Oh goodness... Thanks for the heads up. Will proceed with caution.
 
Reply
0
Old Jul 11, 2016 | 09:02 PM
Share
  #6  
number9's Avatar
Pro Wrench
Joined: Nov 2015
Posts: 1,935
Likes: 189
From: Coastal Georgia
Default
Disassembling in clear plastic bag helps retain the small parts.
......
 
Reply
1
Old Jul 12, 2016 | 05:01 AM
Share
  #7  
ihscouts's Avatar
Camel Trophy
Joined: Jan 2010
Posts: 4,245
Likes: 402
From: Traverse City MI
Default
It's not the quantity of parts, it's the size with large fingers.
 
Reply
1
Old Jul 12, 2016 | 09:08 AM
Share
  #8  
fishEH's Avatar
Camel Trophy
Joined: Nov 2009
Posts: 4,079
Likes: 227
From: IL
Default
There's a write up on here somewhere on rebuilding these. I used a little 2000 grit sandpaper to polish up the contacts and then just a tiny bit of dielectric grease.
 
Reply
0
Old Jul 12, 2016 | 10:09 AM
Share
  #9  
ihscouts's Avatar
Camel Trophy
Joined: Jan 2010
Posts: 4,245
Likes: 402
From: Traverse City MI
Default
Wasn't it you fish that did it last year?
 
Reply
0
Old Jul 12, 2016 | 10:12 AM
Share
  #10  
fishEH's Avatar
Camel Trophy
Joined: Nov 2009
Posts: 4,079
Likes: 227
From: IL
Default
Originally Posted by ihscouts
Wasn't it you fish that did it last year?
I did the repair a few months ago but didn't do a write up on it.
My buddy Eric did the write up on it. https://landroverforums.com/forum/di...witches-62504/


I know, us IL guys all look the same.
 
Last edited by fishEH; Jul 12, 2016 at 10:19 AM.
Reply
0



Advanced Search

All times are GMT -5. The time now is 03:25 PM.