anti lock brake light
#22
#23
#24
#27
http://www.meritorhvs.com/MeritorHVS_Documents/mm38.pdf
HTH
2-2 Recirculation pump
operates continuously
(pump does not
switch off).
Check the recirculation
pump wiring, the pump
relay and the wiring
connections. Repair or
replace as required.
HTH
2-2 Recirculation pump
operates continuously
(pump does not
switch off).
Check the recirculation
pump wiring, the pump
relay and the wiring
connections. Repair or
replace as required.
#28
http://www.meritorhvs.com/MeritorHVS_Documents/mm38.pdf
HTH
2-2 Recirculation pump
operates continuously
(pump does not
switch off).
Check the recirculation
pump wiring, the pump
relay and the wiring
connections. Repair or
replace as required.
HTH
2-2 Recirculation pump
operates continuously
(pump does not
switch off).
Check the recirculation
pump wiring, the pump
relay and the wiring
connections. Repair or
replace as required.
LOL Thank you very much I am going to eat dinner, then I'll read up on what to do.
#29
ha ha. I have found a lot of info on these things, and getting the ABS back on was a bright day for me. Just nice to help someone else have the ah-ha moment I did.
That is from a wabco publication. Not for our specific units, so be careful testing if you are checking wires. Should point the solution a little closer...
Oh, and the base of the relay is blue. Most Rover relays are green or yellow...
Cheers
That is from a wabco publication. Not for our specific units, so be careful testing if you are checking wires. Should point the solution a little closer...
Oh, and the base of the relay is blue. Most Rover relays are green or yellow...
Cheers