Hey Guys,

Water was getting into my passenger side floorboard. Looked like it was dripping out of the blower motor. Pulled that and confirmed that the water was entering via the fresh air intake. The lower windshield seal is resting on the plastic cowl, however is water is poured into area circled below it seeps through and enters the fresh air intake (also pictured). My assumption is that Land Rover would not have been dumb enough to leave a completely open fresh air intake, therefore I must be missing a part. I disassembled the cowl and based on the parts diagram below it looks like I am missing part number 7 (AWR2947). Does anyone have pictures of this component? I cannot find any online and it looks like they are not in stock from most NA dealers.

Truck is a 96 D1, but based on my searches D2's have similar issues.

 

across the pond. Shipping from brit-car is fairly slow but it looks like they have it.

https://www.brit-car.co.uk/product.p...ng_seal_disco1

 

Thanks for taking a look. What I'm trying to determine is if thay seal is any different than the lower windshield finisher. May just order it and see.