crank position sensor help
#22
cps spacer
gine from Paul a few weeks ago and with 100k on the clock and lots of thinking i did a complete rebuild. I will say it was very clean on the inside and had new head gaskets, at the mileage and the fact it was already out why not.
The new engien did not come with a fly wheel so i reused mine. I finnished everything up and went to fire her up and it was ugly. low RPM's knocking and spitting then she shut down and would not fire back up. After poking around i removed the Crank position sensor that came with the engien and this is what it looked like.
I did have the spacer ring installed:
What could be my issue, Ideas to correct this?[/QUOTE]
you need 14mm spacer,
The new engien did not come with a fly wheel so i reused mine. I finnished everything up and went to fire her up and it was ugly. low RPM's knocking and spitting then she shut down and would not fire back up. After poking around i removed the Crank position sensor that came with the engien and this is what it looked like.
I did have the spacer ring installed:
What could be my issue, Ideas to correct this?[/QUOTE]
you need 14mm spacer,
Thread
Thread Starter
Forum
Replies
Last Post