Discovery I Talk about the Land Rover Discovery Series I within.

D1 shutting off

Thread Tools
 
Search this Thread
 
  #1  
Old 10-08-2016, 04:35 PM
MTboggs's Avatar
4wd High
Thread Starter
Join Date: May 2011
Posts: 9
Likes: 0
Received 1 Like on 1 Post
Default D1 shutting off

So this just started happening today. Out of the blue, usually on a deceleration coming to a stop my RPMs dwindle and the motor shuts off. Runs good otherwise. Cleaned Mass Airflow Sensor, planning on replacing O2 sensors (wish they were cheaper). Can anyone point me in the right direction..
Thanks

To add some info - 1994. 3.9. 109000mi. Head redone in last 8000.
 

Last edited by MTboggs; 10-08-2016 at 04:39 PM. Reason: Lack of info
The following users liked this post:
mr4x4 (10-15-2016)
  #2  
Old 10-08-2016, 05:35 PM
ihscouts's Avatar
Camel Trophy
Join Date: Jan 2010
Location: Traverse City MI
Posts: 4,245
Received 401 Likes on 385 Posts
Default

By-pass Air Valve, remove and clean. When's the last time you did a timing check or check for vacuum leaks at the intake mounting bolts and all vacuum hoses? The box under the passenger seat has codes on it, red LED, check it.
 
  #3  
Old 10-08-2016, 05:47 PM
MTboggs's Avatar
4wd High
Thread Starter
Join Date: May 2011
Posts: 9
Likes: 0
Received 1 Like on 1 Post
Default

I will check bypass air valve. I wrote this post a friend's house. When I headed home the truck was trying to shut off while driving. Crankshaft positioning sensor? Everything on top redone/checked in last 8k when heads we redone.
I'll check for vacuum leaks too.

Originally Posted by ihscouts
By-pass Air Valve, remove and clean. When's the last time you did a timing check or check for vacuum leaks at the intake mounting bolts and all vacuum hoses? The box under the passenger seat has codes on it, red LED, check it.
 
  #4  
Old 10-08-2016, 06:17 PM
ihscouts's Avatar
Camel Trophy
Join Date: Jan 2010
Location: Traverse City MI
Posts: 4,245
Received 401 Likes on 385 Posts
Default

The 94/95's (NAS) did not have crank sensors or cam sensors. The RPM is read from the ignition coil and that might be worth a look, coil connections/condition.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ajmille
Discovery II
3
02-21-2012 09:25 AM
ajmille
Discovery II
16
02-08-2012 08:56 PM
Gerard
Discovery II
10
12-07-2011 10:44 PM
Mark G
Discovery I
3
08-01-2010 02:21 PM
brownhorse
Defender
2
06-13-2007 02:55 AM



Quick Reply: D1 shutting off



All times are GMT -5. The time now is 11:43 PM.