Hard start after driven
It' a 1997 discovery 1 , gems, with advanced evap system.
if anyone has an idea I'd greatly appreciate it.
when warmed up and driven, if it sits for more than about 5-10 minutes it won' start until cooled down.
it has new coolant temp sensor (ecu sensor not guage sensor) , fuel temp sensor is about 2.2k ohms at operating temp, it has intermittent spark ( it'l sputter and die) has 35 or so psi fuel at idle.
I'm leaning towards crank position sensor crapping out when warm , or possibly coils.
if anyone can think of something I'm missing , any help would be greatly appreciated.
it has no issues driving at temp, runs great as long as I want it to, just when turned off for a small period of time it happens .
if anyone has an idea I'd greatly appreciate it.
when warmed up and driven, if it sits for more than about 5-10 minutes it won' start until cooled down.
it has new coolant temp sensor (ecu sensor not guage sensor) , fuel temp sensor is about 2.2k ohms at operating temp, it has intermittent spark ( it'l sputter and die) has 35 or so psi fuel at idle.
I'm leaning towards crank position sensor crapping out when warm , or possibly coils.
if anyone can think of something I'm missing , any help would be greatly appreciated.
it has no issues driving at temp, runs great as long as I want it to, just when turned off for a small period of time it happens .
Thread
Thread Starter
Forum
Replies
Last Post
WaxytheTurtle
Discovery II
14
Jul 14, 2011 07:46 AM



