Just got our first disco,does it need modds
#34
#35
just wanted to tell you i contacted the previous owner and he confirmed what u had said and tould me he installed a terraferma 3 inch lift with heavey duty rear and med duty fronts also has w inch sppacers and longer trailiing arms so i think all i need to do is some addons like tires, winch/bumper my thing is i dont want to use the after market arb so what do i do will the disco 2 winch mount fit inbetween the front frame rails
#38
Well with those springs and 1" spacers you should have about 3". The thing with lifts for these things is they come in light, med, and hd, they are all made to give just a slight lift with different loads. So when you put a hd lift on without the intended weight you get close to 3" cause you aren't weighing it down. The only company that I know of who does a true measured lift at different spring rates is rovertym.
Thread
Thread Starter
Forum
Replies
Last Post
Four Engines and Counting
New Member Introduction
3
03-04-2013 12:25 AM
Christina Jon Harrington
Discovery II
1
01-20-2012 03:03 PM