Discovery I Talk about the Land Rover Discovery Series I within.

Not starting

Thread Tools
 
Search this Thread
 
  #11  
Old 01-16-2016 | 02:41 PM
ihscouts's Avatar
Camel Trophy
Joined: Jan 2010
Posts: 4,245
Likes: 401
From: Traverse City MI
Default

Good job. Should run better than it did before it died too.
 
  #12  
Old 01-16-2016 | 02:45 PM
aemnky606's Avatar
Thread Starter
|
Winching
Joined: Feb 2010
Posts: 554
Likes: 58
From: Burlington, NC
Default

I hope so. Now need to get the brakes to hold pressure then its on the road.
 
  #13  
Old 01-16-2016 | 02:54 PM
ihscouts's Avatar
Camel Trophy
Joined: Jan 2010
Posts: 4,245
Likes: 401
From: Traverse City MI
Default

What's up with the brakes not holding pressure?
 
  #14  
Old 01-17-2016 | 08:50 AM
aemnky606's Avatar
Thread Starter
|
Winching
Joined: Feb 2010
Posts: 554
Likes: 58
From: Burlington, NC
Default

I have to bleed them every few weeks. The pedal does not move at a red light, but will have air in the front a lot. I have to add fluid to the front half of the tank at the same time. The fluid is going some place but I can not find it. I am going to start with a rebuild kit for the front calipers and new lines.
 
  #15  
Old 01-17-2016 | 10:15 AM
ihscouts's Avatar
Camel Trophy
Joined: Jan 2010
Posts: 4,245
Likes: 401
From: Traverse City MI
Default

I've been there done that. Should see brake fluid trails on either inside tire wall. If the new pucks and seals don't work because of the caliper bores then it's new/reman calipers. I bought a used set of fronts from Paul Grant and haven't had any issues in several years now.
 
  #16  
Old 01-17-2016 | 11:14 AM
aemnky606's Avatar
Thread Starter
|
Winching
Joined: Feb 2010
Posts: 554
Likes: 58
From: Burlington, NC
Default

I was thinking of just getting new/used ones, Paul just put up a post about parting out a 97.
 
  #17  
Old 01-17-2016 | 12:56 PM
ihscouts's Avatar
Camel Trophy
Joined: Jan 2010
Posts: 4,245
Likes: 401
From: Traverse City MI
Default

Bingo and it sounds like a gem so give em a shout.
 
  #18  
Old 01-17-2016 | 01:46 PM
aemnky606's Avatar
Thread Starter
|
Winching
Joined: Feb 2010
Posts: 554
Likes: 58
From: Burlington, NC
Default

I sent a pm and waiting to hear back.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lazerbrains
LR2
38
08-09-2023 07:54 PM
readdiscovery
Discovery II
3
07-07-2006 05:23 PM
nick
Freelander
1
03-14-2006 04:41 PM
pants
Discovery II
0
10-19-2005 12:47 AM
nick
Forum Help & Suggestion Center
0
07-17-2005 02:04 PM



Quick Reply: Not starting



All times are GMT -5. The time now is 01:16 PM.