Does anyone know if the cruise and ABS are linked? I thought I remember hearing something about the cruise won't work if your ABS is disabled? Any truth to this?

 

No, no truth to that at all.

 

is it in the same location in a disco2? definitly saving this thread

 

Did the swap this weekend. didnt fix my problem, but one thing to check off. My 98 Disco, used that same color wiring as the new module (not according to instructions posted here). I followed the pin-out, and the wiring was the same.

 

Is the AMR5700 and the Bosch P38 the same beast? My AMR1173 is dead and I need a pig tail for the conversion, where can I get a P38 or AMR5700? Bill Mills colitatx@yahoo.com

 

is the amr5700 and the bosch p38 the same? my amr1173 has died, so a new more reliable unit is needed and I will need one of ypur pig tails for which ever one your pig tail fits.
thanks
bill
colitatx@yahoo.com

 

Yes, the cruise control ecu is the same in Bosch P38a's. If you want one with a pigtail it's $17.50 and that includes shipping. You can PayPal me using paulgrant@mac.com or you can call me on Monday with a credit card.
Cheers,
Paul
203-770-1699

 

I finaly located this module in the jy on a d2 it is located behind the pass side kick panel held in by 2 10mm nuts and you can pull it to get 6"++ of harness

 

wired this in today, just cut off the old plug and soldered in the new plug, I now get clicks so need to recheck the pump

 

was having the same problem after soldering in the new cruise ECU (clicks but no cruise), replaced the pump and now i have working cruise!