So what did you do to your Disco today?
#151
It was a D2 weekend:
Replaced:
-New Battery
-Rear right bumper cover (used)
-Rear tail lamp. (used)
-All new rear bulbs.
-(2) Bumper lights (used). Bumper stop still not working correctly.
-Right side window trim/pillar (used). Had to pull the inside wall aside. Really?
-Replaced 20 Fuse for cigarette lighter and other. Forgot about the in-mirror compass. Love it.
Drove it 120 miles (RT a lot for me) to a mountain.....and had a big seafood lunch.
Inline t-stat temps are great <190 but losing a little water still. Can't see a leak. Pressure test next but I'm thinking gaskets of course.
Replaced:
-New Battery
-Rear right bumper cover (used)
-Rear tail lamp. (used)
-All new rear bulbs.
-(2) Bumper lights (used). Bumper stop still not working correctly.
-Right side window trim/pillar (used). Had to pull the inside wall aside. Really?
-Replaced 20 Fuse for cigarette lighter and other. Forgot about the in-mirror compass. Love it.
Drove it 120 miles (RT a lot for me) to a mountain.....and had a big seafood lunch.
Inline t-stat temps are great <190 but losing a little water still. Can't see a leak. Pressure test next but I'm thinking gaskets of course.
Last edited by slanginsanjuan; 04-09-2012 at 08:16 AM. Reason: clarify a little
#152
#153
#154
#156
#158
#159
Nice Turf! it all looks like what I have but stainless steel which is nice
Made the jig for adjustable panhard
It's similar to the one Teledan made last year except I ordered 1.5" .25 wall for the sleeve, Which may be over kill - Turfs is gonna be the test dummy.. got all the other parts from Dan @ Ruff Stuff and going to use an FK rod end which is the best of the best. I plan adding to the jig so I can weld the tube adapter to the panhard before I sleeve it with the DOM. Should be good money will post some pics once the parts get here. IF (kinda big if) I do end up making more of these they will probabably cost a little but more than the ones others have made BUT I will be using the best **** I can find..
End goal
Made the jig for adjustable panhard
It's similar to the one Teledan made last year except I ordered 1.5" .25 wall for the sleeve, Which may be over kill - Turfs is gonna be the test dummy.. got all the other parts from Dan @ Ruff Stuff and going to use an FK rod end which is the best of the best. I plan adding to the jig so I can weld the tube adapter to the panhard before I sleeve it with the DOM. Should be good money will post some pics once the parts get here. IF (kinda big if) I do end up making more of these they will probabably cost a little but more than the ones others have made BUT I will be using the best **** I can find..
End goal
Last edited by Jake1996D1; 04-12-2012 at 10:14 AM.
#160