Land Rover Forums - Land Rover Enthusiast Forum

Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

03 disco 2 no crank no spark

   
Old Dec 9, 2021 | 02:13 PM
Share
  #1  
Gracewyattdad's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2021
Posts: 18
Likes: 0
Default 03 disco 2 no crank no spark
2003 disco 2. New fuel pump, new ckp. No fuel, no spark. Help
 
Reply
0
Old Dec 9, 2021 | 02:17 PM
Share
  #2  
Harvlr's Avatar
TReK
Joined: Sep 2020
Posts: 2,954
Likes: 752
From: British Columbia Canada
Default
Has the inertia switch been tripped?
 
Reply
0
Old Dec 9, 2021 | 02:18 PM
Share
  #3  
Gracewyattdad's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2021
Posts: 18
Likes: 0
Default
I pressed it down multiple times
 
Reply
0
Old Dec 9, 2021 | 02:59 PM
Share
  #4  
Richard Gallant's Avatar
Camel Trophy
Joined: Sep 2017
Posts: 3,813
Likes: 1,331
From: Mission BC Canada
Default
Does it turn over ?
 
Reply
0
Old Dec 9, 2021 | 03:01 PM
Share
  #5  
Gracewyattdad's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2021
Posts: 18
Likes: 0
Default
Turns over strong. Battery between 10-11 v while turning over
 
Reply
0
Old Dec 9, 2021 | 03:57 PM
Share
  #6  
Richard Gallant's Avatar
Camel Trophy
Joined: Sep 2017
Posts: 3,813
Likes: 1,331
From: Mission BC Canada
Default
Check the relays for fuel, no spark is harder but when you turn over does any rpm show.
 
Reply
0
Old Dec 9, 2021 | 04:06 PM
Share
  #7  
Gracewyattdad's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2021
Posts: 18
Likes: 0
Default
No rpm on gauge. Not sure if my OBD reader shows rpms
 
Reply
0
Old Dec 9, 2021 | 04:41 PM
Share
  #8  
Richard Gallant's Avatar
Camel Trophy
Joined: Sep 2017
Posts: 3,813
Likes: 1,331
From: Mission BC Canada
Default
If the RPM does not move that is almost always the CPS, you should get a small movement while the engine turns over.
 
Reply
0
Old Dec 9, 2021 | 04:51 PM
Share
  #9  
Gracewyattdad's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2021
Posts: 18
Likes: 0
Default
Camshaft position sensor correct?
 
Reply
0
Old Dec 9, 2021 | 05:06 PM
Share
  #10  
Harvlr's Avatar
TReK
Joined: Sep 2020
Posts: 2,954
Likes: 752
From: British Columbia Canada
Default
Crankshaft position sensor
 
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 08:52 PM.