Enjoy that D2 it was going to be mine.

 

Thanks everyone. Ill post an update once i get everything installed.

Still on the fence regarding the rear sway bars, ill have to do some R&D once i get everything installed.

 

convert the rear to panhard, don't run any sways, make sure the shocks are valved correctly

 

That's likely what i'll do when it comes time.

Just ordered everything except the front drive shaft, waiting to take measurements once I get the springs installed.

After talking to Justin and Steve at Lucky8, I ended up getting the Heavy TF Springs (TF015 Front, TF027v Rear). Without the weight of bumpers/winch it should net me just under 4" to clear the 33's. Time will tell.

 

Finished installing the lift, next up are the diffs, then brakes rotors/pads/ss lines, then front sway bar disconnects, and finally f/r drive shafts.

I still need to order the front driveshaft. I'm thinking the Tom Woods Double Cardan.

 

Looking sharp!

I'm running the Tom Woods double cardan up front and his regular shaft in the back (deleted the rotoflex) and I couldn't be happier with his products.

Ordered both of them thru Lucky8 and they handled the measurement process for me so it was easier than going thru the Tom Woods website and I think the price was the same.