I made the bypass on SVS (option B) such as described in manual, then made ​​the diagnostic and deleting of the fault codes and resulted that the codes displayed before the diagnostic have been deleted, but appeared a new error with the front right ABS sensor, if I do the replacement of this sensor
could disappear the 3 Amigos?

 

do the 3 lights come on right when you start the truck or does it take a minute after your driving? if they come on right away then just replace the sensor. if it takes a minute it could be the bearings in the hub are shot and its wobbling pulling the sensor in and out of range.

 

the 3 lights "come" when I do a few (400-500)meters,
even they are not appearing, but when I made a strong braking and they appear again.
I made ​​the diagnose during the moving car, and and this sensor (the front right) read the values ​​smaller than 3 others. I'm confused I do not know what to do.

 

check the plug for corrosion before you replace anything. baking soda and water then clean it with electronic cleaner.