When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm wondering if an all in one piece could be designed where aftermarket round or oval turn signals could be installed in the corners. Those look awesome btw!!!
This is a brilliant forum that I stumbled on today while looking for spare parts for my Discovery 1. 3D printing parts is such an epic idea and I wanna thank whoever came up with it. It might be life saving for many who are looking for sold out parts like me.
I also am aware that this is the D2 forum, but I have a '94 D1 and I was wondering if someone has the 3D model for the cargo door handle?
This is a brilliant forum that I stumbled on today while looking for spare parts for my Discovery 1. 3D printing parts is such an epic idea and I wanna thank whoever came up with it. It might be life saving for many who are looking for sold out parts like me.
I also am aware that this is the D2 forum, but I have a '94 D1 and I was wondering if someone has the 3D model for the cargo door handle?
Thank you so much!
If you can get the measurements for it, you can pay someone on fivver just a few dollars to make the printable file.
This is a brilliant forum that I stumbled on today while looking for spare parts for my Discovery 1. 3D printing parts is such an epic idea and I wanna thank whoever came up with it. It might be life saving for many who are looking for sold out parts like me.
I also am aware that this is the D2 forum, but I have a '94 D1 and I was wondering if someone has the 3D model for the cargo door handle?
Thank you so much!
You're welcome! Check thingiverse.com and search for combinations of Land Rover, Discovery, etc. and see if anything has been posted there.
For those of you trying to print the front rain gutters, you need to turn on "Generate support material" in your slicer software. Here is an example of one I just printed in PTEG using supports, and it came our perfect.
This is a brilliant forum that I stumbled on today while looking for spare parts for my Discovery 1. 3D printing parts is such an epic idea and I wanna thank whoever came up with it. It might be life saving for many who are looking for sold out parts like me.
I also am aware that this is the D2 forum, but I have a '94 D1 and I was wondering if someone has the 3D model for the cargo door handle?
I could get prints with PETG, but I was not happy with any of them they were not great.
Ended printing in resin, there is more post work in uv sealer, paint, then UV seal but the prints were pretty much perfect other than supports.
I used an Ender 3 I had a few issues a the top but otherwise is was ok, I found the inside support to weak and the top gutter catch generally failed. I did get the issues in image 1 & 2 with layers sorted out, but the print time was 6 hours.
after a long adventure of trying to get this to print in abs for weeks. Lots of testing and calibrating. It was a shame to find out the fitment was garbage.
doesn’t catch like you stated. It’s also not as long, once it is set in place it doesn’t tuck into the windshield gasket.
For those of you trying to print the front rain gutters, you need to turn on "Generate support material" in your slicer software. Here is an example of one I just printed in PTEG using supports, and it came our perfect.
