Transfer case is wanting to shoot into high orbit, im kinda certain the bearings are shot. So since i dont know when it will leave me stranded or if ill continue to test during the summer, i leave the forum this.

https://cults3d.com/en/3d-model/vari...-headlight-5x7

yall let me know how it goes printing

 

Here is my thingy verse

https://www.thingiverse.com/thing:6540952

 

I don't have a 3d printer and was wondering if how much someone with one would charge to print the front driver's side sunroof drain. Got in my Disco 2 today and it was like a monsoon so I pulled the headliner and that's the issue along with the seals on the rear sunroof drains leaking.

 

I designed a sleeve insert for the cupholder of the disco 2 so it can hold the larger energy drink cans like monsters, ghost, bang, etc. The 16-20 oz cans.

Cup holder insert

 

https://www.thingiverse.com/thing:6569527

Axle brass fitting replacement.

I attempted to cut threads on the fitting, now known to me as being brass and press fit.

replacement has held at 250 miles and 1 offroad trip with mud.

 

Hi.. has anyone made an stl for the small white bracket that sits in the window glass? Thanks

 

Pouvez vous donner le lien pour ces pièces à imprimer ?
Merci

 

Peut-être vous donner le lien pour ces pièces à imprimer ? Merci

 

Good day all

Has anybody ever attempted to print the rear upper taillight guards? Even if you print them in 2 pieces and join or glue them afterwards. Same as the one around light in picture below.

 

They are on ebay for $80, it's not worth the effort and disadvantages of 3D printed parts. I just got a pair and they fit. They feel a bit flimsy, but I do not intent to hit trees in reverse. Nevertheless, they should survive when hitting some shrubs occasionally.