I've just installed a Warn winch using DAR's discrete mount.

After some help by you folks and a little assistance from Mr. Drimmel, I'm good to go.

Now I need to focus on an A-bar. Although I might have to go the full brush guard route in a pinch.

Anyway, you can get a sense of the installin the attached jpeg. Sorry it's so lousy, but my camera phone isn't that great.

I really, really like the looks of the factor poly guard for the '03 and '04 model. Also, attached.

The problem that I'm having is I don't know if it will work with my existing setup. I can't get a good sense of whether the winch's fairlead will be in the way.

I have a one piece bumper without fog lights and the winch tray is mounted between the crush cans. I think that I can sandwhich another gizmo to the cans so long as I use longer bolts.

If anyone can give me an idea of how to make this work or point out one that would, I'd greatly appreciate it.

Thanks!





[IMG]local://upfiles/10079/C74C903731C5453FAEE966A79BEFB41C.jpg[/IMG]

[IMG]local://upfiles/10079/404AD727907A44039730617CEC552B2B.jpg[/IMG]

 

Better lift that front end up or a new steel bumper will be in order.