Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Brakes cut out yesterday. Here's the story.

Thread Tools
 
Search this Thread
 
  #21  
Old 08-10-2021, 02:11 AM
The Deputy's Avatar
Camel Trophy
Join Date: Oct 2016
Location: Michigan
Posts: 4,690
Received 1,275 Likes on 896 Posts
Default

Calipers are on the right sides, correct? Bleeders must be on top of caliper, if you have them wrong, right side on left side, vise-versa, bleeders will be on bottom...and you will never get air out of system.

 
  #22  
Old 08-10-2021, 02:15 AM
Brandon318's Avatar
Pro Wrench
Thread Starter
Join Date: Apr 2019
Location: Monterey, CA
Posts: 1,613
Received 442 Likes on 279 Posts
Default

Originally Posted by The Deputy
Calipers are on the right sides, correct? Bleeders must be on top of caliper, if you have them wrong, right side on left side, vise-versa, bleeders will be on bottom...and you will never get air out of system.
I hope I'm not that dumb but would make sense. I'll check tomorrow.
 
The following users liked this post:
nashvegas (09-28-2021)
  #23  
Old 08-10-2021, 04:45 PM
Brandon318's Avatar
Pro Wrench
Thread Starter
Join Date: Apr 2019
Location: Monterey, CA
Posts: 1,613
Received 442 Likes on 279 Posts
Default

SOLVED. Thanks @The Deputy I am indeed the idiot I was hoping I wasn't. The fronts were on right-side up, but the rears were swapped. The brakes have never felt better.
 
The following 3 users liked this post by Brandon318:
nashvegas (09-28-2021), Richard Gallant (08-10-2021), Xanthro (08-10-2021)
  #24  
Old 08-10-2021, 06:15 PM
The Deputy's Avatar
Camel Trophy
Join Date: Oct 2016
Location: Michigan
Posts: 4,690
Received 1,275 Likes on 896 Posts
Default

Good news!

And don't feel bad...you are not the first to experience this...and it's highly unlikely...you will be the last.

 
  #25  
Old 08-10-2021, 06:21 PM
COSPILOT's Avatar
Rock Crawling
Join Date: Jun 2017
Location: Colorado Springs
Posts: 255
Received 37 Likes on 32 Posts
Default

OP and another commented on negative experiences with EBC brakes, would you both expand on that? I switched to EBC recently, only 1,000 miles on them so far, but I’m happy. Between all my Rovers I’ve had mixed results with factory rotors and pads and decided to try something different.

I couldn’t care less about looks. I care about noise, not even life of the pads/rotors.
 
  #26  
Old 09-18-2021, 04:08 PM
Brandon318's Avatar
Pro Wrench
Thread Starter
Join Date: Apr 2019
Location: Monterey, CA
Posts: 1,613
Received 442 Likes on 279 Posts
Default

Wanted to follow up with all this. The solution for me was replacing the pads and rotors (went OEM) and also the brake booster and master cylinder (sourced both of these from a junk yard Disco). Brakes have never felt better.
 
The following users liked this post:
The Deputy (09-18-2021)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
escott16
Discovery II
15
11-25-2017 10:22 AM
redrover99
Discovery I
43
05-21-2015 07:56 PM
CANAMDiscovery
Discovery II
4
06-04-2012 06:54 AM
m1964
LR2
11
11-17-2008 09:49 PM
cbrantner
Discovery II
6
11-07-2007 05:33 PM



Quick Reply: Brakes cut out yesterday. Here's the story.



All times are GMT -5. The time now is 04:49 PM.