So I have a Cobra WX75 that’s been kicking around my parts bin for about 15 years. Was thinking about mounting it in my Disco. Looking for ideas for routing the hot lead and the coax out the front to the bull bar for the antenna. I plan on putting the module under the center console. I looked at the fuse panel under the steering wheel. Looks pretty tight and daunting in there. I don’t see and obvious place to tap the hot from. Any ideas would be appreciated. Also looking for a grommet blank in the firewall to run the coax into the engine compartment.

 

I mounted mine on the spare tire holder and routed the cable through the rear window washer grommet