I got mine from him off of eBay a couple of months ago.

 

this looks really cool and makes makes replacement easier but it seems like allot of extra work for .... i mean how many times you need to change the coil packs on these cars? Mines a 2000. Same coil packs. Never changed no problems.

 

Hey guys, I'm in a jam. Recently was rear ended. Now with a misfire on cylinder #5. Pretty sure the coil may have taken a hit. Taking the Disco on our honeymoon in just a few weeks and not a lot of time to work on it with the laundry list of stuff.

Planning on replacing the coils and would like to do the relocation. Don't see the kits on ebay any longer and no reply from Gerry on his youtube channel.

If anyone has made their own coil harness extension looms, please point me in the direction of the proper JPT connectors. I can fab a mount, but would certainly entertain a complete kit if Gerry pops back up that he has any in stock.

Thanks in advance for any help! Cheers! John

 

I bought a kit off Gerry he replied quick upon my order but one of my wire extensions somehow touched the manifolds contacted him to get new wire extensions sent to me I wouid oay and Gerry kept saying next week I will ship out well after saying this for 3 months he doesn’t even reply to my messages
total tool gate people like this.

 

That's a shame. I know some folks likely made their own kits, so am hoping someone on here has some insight for me.

 

U can just cut your wires extend them with similar wires
this is how mine is now for 3 months no issues

 

Thanks for that feedback. :-). I wasn't sure there was enough slack in the stock harness to get in there and extend those plugs.

 

hello all,

2003 Disco 2 134,000 miles. I have decided to do this and have one simple question. Without removing the plenum all I need to do is release the connectors on the 2 coils and attach
them to the new wiring harness. Correct? How difficult is it to release those connectors? How far down is the coil located on the firewall? I have read that if I modify a screwdriver (bend it) I can accomplish this? No mechanic in NYC wishes to do this. Everyone wishes to remove the plenum and charge big money.

Thank you and B well,
Jeff

 

Well if he is no longer selling or supporting this I’m going to go ahead and lock this thread as it has run it’s course.