gear light flashing
#11
#12
I was looking for something like what you said in the RAVE, but couldn't find anything. It wouldn't hurt to move the shifter into high and see.
I was also thinking along those lines also and thinking maybe the switch was somehow grounded through the shifter cable, so that the light might come on to let you know there was a problem, if it ever broke while driving. I couldn't find anything to back up that theory in the RAVE. I suppose you could touch the 2 broken ends of the shifter cable together to test that.
Hang in there and stay positive. Just keep eliminating things and you are bound to find the problem.
#13
I got it. The lever on the transfercase that the aforementioned cable attaches to was engaged in high gear just enough to drive it. Got a big *** prybar and a bit of a push after soaking in some pb blaster make a huge difference. Light is off. Shifter still sits in the middle.. then again a busted cable will do that. Re riveted the floor back in for now as cold air flows through that big hole In the floor. For future reference... If the shifter has never been moved... don't touch it... lol
Thanks for the help with the sensors. I didn't break any of them it turns out. The lever on the case was frozen. THAT'S Why The Cable snapped
Thanks for the help with the sensors. I didn't break any of them it turns out. The lever on the case was frozen. THAT'S Why The Cable snapped
#14
I got it. The lever on the transfercase that the aforementioned cable attaches to was engaged in high gear just enough to drive it. Got a big *** prybar and a bit of a push after soaking in some pb blaster make a huge difference. Light is off. Shifter still sits in the middle.. then again a busted cable will do that. Re riveted the floor back in for now as cold air flows through that big hole In the floor. For future reference... If the shifter has never been moved... don't touch it... lol
Thanks for the help with the sensors. I didn't break any of them it turns out. The lever on the case was frozen. THAT'S Why The Cable snapped
Thanks for the help with the sensors. I didn't break any of them it turns out. The lever on the case was frozen. THAT'S Why The Cable snapped
#15
#16
Thread
Thread Starter
Forum
Replies
Last Post
importdave
Discovery II
5
09-25-2014 10:18 PM
Rsbuz
LR2
0
09-06-2014 12:52 PM
Lee1140
General Range Rover Discussion - Archived
0
12-01-2009 10:17 AM