I'm out of town right now, but I can pull out the OBD and get you a temp reading in a few days.

To be honest, I just walked in O'Reilly and got the biggest one that would fit right onto the MAF. I wouldn't see there being much area difference between the cone and the pod, but I don't actually know the numbers.

 

Ok, I just took some temp readings. It's 66 degrees outside according to the built in thermometer. Going down the 4 lane at 60 the intake temp was 74.2 degrees. At idle it climbed quite a lot (past 110), but once you got moving it went right back down pretty quick.

Can't wait to see if those angled spacer works. Please post back once you find out.

 

got the weld in bungs today, i have a couple side jobs after work to do, but those are on my list of things to get done lol... gotta drop the front half of the exhaust and drill the holes and weld em in..

 

Ah, so the headers don't come with 02 bungs.

 

Nope. The headers stop before the cats. You need to whip up some custom exhaust with O2 bungs fore and aft of the cats.

 

this is what ive got, 4 new o2 sensors, weld on bungs and 2 right angle spacers, since im catless... hopefully being 6" off the flow of exhaust i wont throw codes... now that i have everything, hopefully i can get to these this weekend!!!

 

Where'd you source those right angle spacers?

 

ebay for around $30 for the pair... i originally got em for my bmw but havent got the headers yet so they will go on the land rover for now

 

What are they, 17mm or something?

 

18mm. They can be found on eBay by searching "90 degree O2 spacer"