When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
thread the PCV into the intake (replaces plastic black nipple), then once the tube is drilled out where the plastic baffle lived re-install the hose and bingo all done.
Removed my IM and installed new coil packs, ignition wires, IM gasket, and air filter....
also did the PCV mod ....
she’s running strong.
I just used that bit and held the sleeve with pliers.... had to let it cool about 4 times before I was done... mod takes less than 10mins Hammered this guy back in softly POS wires and two different brand coil packs Magnecore 8s From AB with L8’s coil packs
03-07-2020, 06:18 PM
Done Problem solved!
