LAND ROVER DISCO II PROBLEMS

Reply Subscribe

Thread Tools

Search this Thread

Dec 8, 2007 | 05:50 PM

RYANHASADD

Thread Starter

6th Gear

Joined: Dec 2007

Posts: 6

Likes: 0

LAND ROVER DISCO II PROBLEMS

Hey, I am new to the forum. I need to remove the plenum to change my spark plug wires. Anybody know where i can get a write up for removla and installation. Thanks...RYAN

Dec 8, 2007 | 05:59 PM

RYANHASADD

Thread Starter

6th Gear

Joined: Dec 2007

Posts: 6

Likes: 0

RE: LAND ROVER DISCO II PROBLEMS

It's a 99 disocery II Sorry i forgot the year.

Dec 8, 2007 | 06:06 PM

willstevens

Three Wheeling

Joined: Nov 2007

Posts: 93

Likes: 0

From:

RE: LAND ROVER DISCO II PROBLEMS

a Rave cd will give you the info you need. I have read in this forum that you can get it online and download it.

Dec 10, 2007 | 10:36 AM

tailchaser0527

Rock Crawling

Joined: Apr 2006

Posts: 258

Likes: 2

From:

RE: LAND ROVER DISCO II PROBLEMS

Rave CD is good, and FREE. You can get the plug wires changed w/o removing the plenum, very carefully and with a small set of hands. ( I used my 16yr old brother to help)

Dec 10, 2007 | 03:23 PM

Savannah

Three Wheeling

Joined: Nov 2007

Posts: 53

Likes: 0

RE: LAND ROVER DISCO II PROBLEMS

Like you said,small hands does the trick.Also helps if the engine is cold.
Regards
Marius

Dec 10, 2007 | 04:17 PM

Disco Mike

Administrator

Joined: Apr 2006

Posts: 25,707

Likes: 107

From: Denver, Colorado

RE: LAND ROVER DISCO II PROBLEMS

A 99 D2 can be done by hand without removing the intake, may bruse a knuckle but can be done in under 1.5 hours. What brand of wires are you planning on using??? Magnacor 8 mm are the only way to go.
Mike

Dec 10, 2007 | 07:24 PM

SpeedAgent

Mudding

Joined: Jun 2007

Posts: 206

Likes: 0

RE: LAND ROVER DISCO II PROBLEMS

This was posted a while back. I haven't done it myself so I can't verify, but it looks pretty detailed.

https://landroverforums.com/m_41479/tm.htm

Dec 11, 2007 | 04:39 AM

jleblanc

4th Gear

Joined: Dec 2007

Posts: 4

Likes: 0

RE: LAND ROVER DISCO II PROBLEMS

I used that guide to do mine without removing the plenum, it's very good. I didn't need a special tool to remove the wires at the coil packs though, I could get to them with my hands.