P0101 - Air flow to throttle angle cross check fault Drive cycle B:Signal implausible.
P0102 - Mass air flow sensor fault Drive cycle A:Signal out of range - below minimum.
P0103 - Mass air flow sensor fault Drive cycle A:Signal out of range - above maximum.
P0112 - Intake-air temperature sensor fault (in MAFS) Drive cycle B:Signal out of range - below minimum.
P0113 - Intake-air temperature sensor fault (in MAFS) Drive cycle B:Signal out of range - above maximum.
P0116 - Engine coolant temperature sensor input fault Drive cycle D:Signal implausible.
P0117 - Engine coolant temperature sensor input fault Drive cycle D:Signal out of range - below minimum.
P0118 - Engine coolant temperature sensor input fault Drive cycle D:Signal out of range - above maximum.
P0122 - Plausibility check - throttle angle Drive cycle B:Signal out of range - below minimum.
P0123 - Plausibility check - throttle angle Drive cycle B:Signal out of range - above maximum.
P0130 - Lambda sensor upstream catalyst bank 1 Drive cycle C:Signal implausible.
P0132 - Lambda sensor upstream catalyst bank 1 Drive cycle C:Signal out of range - above maximum.
P0133 - Lambda sensor aging tp bank 1 Drive cycle C:Signal out of range - above maximum.
P0133 - Lambda sensor aging tp bank 1 Drive cycle C:Signal out of range - below minimum.
P0134 - Lambda sensor upstream catalyst bank 1 Drive cycle C:Signal missing.
P0135 - Oxy Sensor Heater Upstream Cat bank 1 Drive cycle C:Signal out of range - above maximum.
P0135 - Oxy Sensor Heater Upstream Cat bank 1 Drive cycle C:Signal out of range - below minimum.
P0136 - Lambda sensor downstream catalyst bank 1 Drive cycle C:Signal implausible.
P0137 - Lambda sensor downstream catalyst bank 1 Drive cycle C:Signal out of range - below minimum.
P0138 - Lambda sensor downstream catalyst bank 1 Drive cycle C:Signal out of range - above maximum.
P0139 - Lambda sensor aging downstream bank 1 Drive cycle C:Signal out of range - above maximum.
P0139 - Lambda sensor aging downstream bank 1 Drive cycle C:Signal out of range - below minimum.
P0140 - Lambda sensor downstream catalyst bank 1 Drive cycle C:Signal missing.
P0141 - Oxy Sensor Heater Downstream Cat bank 1 Drive cycle C:Signal out of range - above maximum.
P0141 - Oxy Sensor Heater Downstream Cat bank 1 Drive cycle C:Signal out of range - below minimum.
P0150 - Lambda sensor upstream catalyst bank 2 Drive cycle C:Signal implausible.
P0152 - Lambda sensor upstream catalyst bank 2 Drive cycle C:Signal out of range - above maximum.
P0153 - Lambda sensor aging tp bank 2 Drive cycle C:Signal out of range - above maximum.
P0153 - Lambda sensor aging tp bank 2 Drive cycle C:Signal out of range - below minimum.
P0154 - Lambda sensor upstream catalyst bank 2 Drive cycle C:Signal missing.
P0155 - Oxy Sensor Heater Upstream Cat bank 2 Drive cycle C:Signal out of range - above maximum.
P0155 - Oxy Sensor Heater Upstream Cat bank 2 Drive cycle C:Signal out of range - below minimum.
P0156 - Lambda sensor downstream catalyst bank 2 Drive cycle C:Signal implausible.
P0157 - Lambda sensor downstream catalyst bank 2 Drive cycle C:Signal out of range - below minimum.
P0158 - Lambda sensor downstream catalyst bank 2 Drive cycle C:Signal out of range - above maximum.
P0159 - Lambda sensor aging downstream bank 2 Drive cycle C:Signal out of range - above maximum.
P0159 - Lambda sensor aging downstream bank 2 Drive cycle C:Signal out of range - below minimum.
P0160 - Lambda sensor downstream catalyst bank 2 Drive cycle C:Signal missing.
P0161 - Oxy Sensor Heater Downstream Cat bank 2 Drive cycle C:Signal out of range - above maximum.
P0161 - Oxy Sensor Heater Downstream Cat bank 2 Drive cycle C:Signal out of range - below minimum.
P0171 - Additive adaptive mixture correction TRA bank 1 Drive cycle B:Signal out of range - above maximum.
P0171 - Mixture adaption factor FRA bank 1 Drive cycle C:Signal out of range - above maximum.
P0172 - Additive adaptive mixture correction TRA bank 1 Drive cycle B:Signal out of range - below minimum.
P0172 - Mixture adaption factor FRA bank 1 Drive cycle C:Signal out of range - below minimum.
P0174 - Additive adaptive mixture correction TRA bank 2 Drive cycle B:Signal out of range - above maximum.
P0174 - Mixture adaption factor FRA bank 2 Drive cycle C:Signal out of range - above maximum.
P0175 - Additive adaptive mixture correction TRA bank 2 Drive cycle B:Signal out of range - below minimum.
P0175 - Mixture adaption factor FRA bank 2 Drive cycle C:Signal out of range - below minimum.
P0201 - Fuel Injector fault - cylinder 1 Drive cycle A:Signal missing.
P0202 - Fuel Injector fault - cylinder 2 Drive cycle A:Signal missing.
P0203 - Fuel Injector fault - cylinder 3 Drive cycle A:Signal missing.
P0204 - Fuel Injector fault - cylinder 4 Drive cycle A:Signal missing.
P0205 - Fuel Injector fault - cylinder 5 Drive cycle A:Signal missing.
P0206 - Fuel Injector fault - cylinder 6 Drive cycle A:Signal missing.
P0207 - Fuel Injector fault - cylinder 7 Drive cycle A:Signal missing.
P0208 - Fuel Injector fault - cylinder 8 Drive cycle A:Signal missing.
P0261 - Fuel Injector fault - cylinder 1 Drive cycle A:Signal out of range - below minimum.
P0262 - Fuel Injector fault - cylinder 1 Drive cycle A:Signal out of range - above maximum.
P0264 - Fuel Injector fault - cylinder 2 Drive cycle A:Signal out of range - below minimum.
P0265 - Fuel Injector fault - cylinder 2 Drive cycle A:Signal out of range - above maximum.
P0267 - Fuel Injector fault - cylinder 3 Drive cycle A:Signal out of range - below minimum.
P0268 - Fuel Injector fault - cylinder 3 Drive cycle A:Signal out of range - above maximum.
P0270 - Fuel Injector fault - cylinder 4 Drive cycle A:Signal out of range - below minimum.
P0271 - Fuel Injector fault - cylinder 4 Drive cycle A:Signal out of range - above maximum.
P0273 - Fuel Injector fault - cylinder 5 Drive cycle A:Signal out of range - below minimum.
P0274 - Fuel Injector fault - cylinder 5 Drive cycle A:Signal out of range - above maximum.
P0276 - Fuel Injector fault - cylinder 6 Drive cycle A:Signal out of range - below minimum.
P0277 - Fuel Injector fault - cylinder 6 Drive cycle A:Signal out of range - above maximum.
P0279 - Fuel Injector fault - cylinder 7 Drive cycle A:Signal out of range - below minimum.
P0280 - Fuel Injector fault - cylinder 7 Drive cycle A:Signal out of range - above maximum.
P0282 - Fuel Injector fault - cylinder 8 Drive cycle A:Signal out of range - below minimum.
P0283 - Fuel Injector fault - cylinder 8 Drive cycle A:Signal out of range - above maximum.
P0300 - Emission relevant misfire multiple cylinders Drive cycle C:Signal out of range - above maximum.
P0301 - Catalyst damaging misfire cyl 1 Drive cycle C:Signal out of range - above maximum.
P0301 - Emission relevant misfire cyl 1 Drive cycle C:Signal out of range - above maximum.
P0302 - Catalyst damaging misfire cyl 2 Drive cycle C:Signal out of range - above maximum.
P0302 - Emission relevant misfire cyl 2 Drive cycle C:Signal out of range - above maximum.
P0303 - Catalyst damaging misfire cyl 3 Drive cycle C:Signal out of range - above maximum.
P0303 - Emission relevant misfire cyl 3 Drive cycle C:Signal out of range - above maximum.
P0304 - Catalyst damaging misfire cyl 4 Drive cycle C:Signal out of range - above maximum.
P0304 - Emission relevant misfire cyl 4 Drive cycle C:Signal out of range - above maximum.
P0305 - Catalyst damaging misfire cyl 5 Drive cycle C:Signal out of range - above maximum.
P0305 - Emission relevant misfire cyl 5 Drive cycle C:Signal out of range - above maximum.
P0306 - Catalyst damaging misfire cyl 6 Drive cycle C:Signal out of range - above maximum.
P0306 - Emission relevant misfire cyl 6 Drive cycle C:Signal out of range - above maximum.
P0307 - Catalyst damaging misfire cyl 7 Drive cycle C:Signal out of range - above maximum.
P0307 - Emission relevant misfire cyl 7 Drive cycle C:Signal out of range - above maximum.
P0308 - Catalyst damaging misfire cyl 8 Drive cycle C:Signal out of range - above maximum.
P0308 - Emission relevant misfire cyl 8 Drive cycle C:Signal out of range - above maximum.
P0327 - Knock sensor fault bank 1 Drive cycle B:Signal out of range - below minimum.
P0328 - Knock sensor fault bank 1 Drive cycle B:Signal out of range - above maximum.
P0332 - Knock sensor fault bank 2 Drive cycle B:Signal out of range - below minimum.
P0333 - Knock sensor fault bank 2 Drive cycle B:Signal out of range - above maximum.
P0335 - Reference mark detector fault (Reluctor wheel) Drive cycle A:Signal implausible.
P0336 - Crank sensor tooth fault (flywheel teeth) Drive cycle A:Signal implausible.
P0340 - Camshaft sensor fault/Valve timing error Drive cycle A:Signal implausible.
P0412 - Secondary air valve power stage fault Drive cycle D:Signal out of range - above maximum.
P0413 - Secondary air valve power stage fault Drive cycle D:Signal missing.
P0414 - Secondary air valve power stage fault Drive cycle D:Signal out of range - below minimum.
P0418 - Secondary air pump power stage (relay) fault Drive cycle D:Signal missing.
P0418 - Secondary air pump power stage (relay) fault Drive cycle D:Signal out of range - above maximum.
P0418 - Secondary air pump power stage (relay) fault Drive cycle D:Signal out of range - below minimum.
P0420 - Catalyst deteriorated bank 1 Drive cycle C:Signal out of range - below minimum.
P0430 - Catalyst deteriorated bank 2 Drive cycle C:Signal out of range - below minimum.
P0440 - Evaporative control system fault Drive cycle C:Signal out of range - above maximum.
P0441 - Evaporative control system fault Drive cycle C:Signal out of range - below minimum.
P0442 - Evaporative control system - small leak detected Drive cycle: Forced Leak Test:Signal out of range - below minimum.
P0443 - Canister purge valve fault (power stage) Drive cycle C:Signal out of range - above maximum.
P0444 - Canister purge valve fault (power stage) Drive cycle C:Signal missing.
P0445 - Canister purge valve fault (power stage) Drive cycle C:Signal out of range - below minimum.
P0446 - Purge canister vent valve functionality fault Drive cycle C:Signal out of range - below minimum.
P0447 - Purge canister vent valve/DMTL power stage fault Drive cycle C:Signal missing.
P0448 - Purge canister vent valve/DMTL power stage fault Drive cycle C:Signal out of range - below minimum.
P0449 - Purge canister vent valve/DMTL power stage fault Drive cycle C:Signal out of range - above maximum.
P0451 - Fuel tank pressure sensor fault Drive cycle C:Signal implausible.
P0452 - Fuel tank pressure sensor fault Drive cycle C:Signal out of range - below minimum.
P0453 - Fuel tank pressure sensor fault Drive cycle C:Signal out of range - above maximum.
P0455 - Evaporative control system - large leak detected Drive cycle: Forced Leak Test:Signal out of range - below minimum.
P0500 - Vehicle speed sensor signal error Drive cycle B:Signal missing.
P0501 - Vehicle speed sensor signal error Drive cycle B:Signal implausible.
P0505 - Blocked Idle Air Control Valve Drive cycle A:Signal out of range - above maximum.
P0505 - Blocked Idle Air Control Valve Drive cycle A:Signal out of range - below minimum.
P0560 - Battery voltage not plausible Drive cycle A:Signal missing.
P0562 - Battery voltage not plausible Drive cycle A:Signal out of range - below minimum.
P0563 - Battery voltage not plausible Drive cycle A:Signal out of range - above maximum.
P0600 - CAN Interface timeout Transmission Control Module Drive cycle A:Signal missing.
P0601 - Control unit defective (ROM) Drive cycle A:Signal implausible.
P0603 - Control unit defective (xRAM) Drive cycle A:Signal implausible.
P0603 - Values in fault memory not plausible Drive cycle A:Signal implausible.
P0604 - Control unit defective (iRAM) Drive cycle A:Signal implausible.
P0606 - Knock control self test pulse fault Drive cycle A:Signal out of range - below minimum.
P0606 - Knock control self test zero pulse fault Drive cycle A:Signal implausible.
P0650 - Malfunction Indicator Lamp (MIL) fault Drive cycle A:Signal out of range - above maximum.
P0654 - Engine Speed signal (power stage) Drive cycle A:Signal out of range - below minimum.
P0703 - Solenoid valve lockup clutch check (S/C to +12V).
P0705 - Position switch monitoring.
P0721 - Downshift safety monitoring.
P0722 - Stall speed monitoring.
P0731 - Gear ratio monitoring (1st gear).
P0733 - Gear ratio monitoring (3rd gear).
P0734 - Gear ratio monitoring (4th gear).
P0741 - Lock-up clutch monitoring.
P0743 - Solenoid valve lockup clutch monitoring (S/C to Ground or O/C).
P0748 - Pressure regulator check (S/C to +12V).
P0748 LT - Pressure regulator monitoring (S/C to Ground or O/C).
P0753 - Solenoid valve 1 check (S/C to +12V).
P0753 - Solenoid valve 1 monitoring (S/C to Ground or O/C).
P0758 - Solenoid valve 2 check (S/C to +12V).
P0758 - Solenoid valve 2 monitoring (S/C to Ground or O/C).
P1129 - Upstream oxygen sensors connected incorrectly (swapped) Drive cycle C:Signal implausible.
P1170 - Lambda sensor aging tv bank 1 Drive cycle C:Signal out of range - above maximum.
P1170 - Lambda sensor aging tv bank 1 Drive cycle C:Signal out of range - below minimum.
P1173 - Lambda sensor aging tv bank 2 Drive cycle C:Signal out of range - above maximum.
P1173 - Lambda sensor aging tv bank 2 Drive cycle C:Signal out of range - below minimum.
P1230 - Fuel pump relay fault Drive cycle A:Signal missing.
P1231 - Fuel pump relay fault Drive cycle A:Signal out of range - below minimum.
P1232 - Fuel pump relay fault Drive cycle A:Signal out of range - above maximum.
P1319 - Misfire with Low/Empty Fuel Drive cycle C:Signal out of range - above maximum.
P1412 - Secondary air system fault bank 1 Drive cycle D:Signal implausible.
P1413 - Secondary air system fault bank 1 Drive cycle D:Signal out of range - above maximum.
P1414 - Secondary air system fault bank 1 Drive cycle D:Signal out of range - below minimum.
P1510 - Idle Air Control Valve fault (opening) Drive cycle A:Signal missing.
P1513 - Idle Air Control Valve fault (opening) Drive cycle A:Signal out of range - below minimum.
P1514 - Idle Air Control Valve fault (opening) Drive cycle A:Signal out of range - above maximum.
P1535 - ## Compressor request plausibility fault Drive cycle A:Signal implausible.
P1551 - Idle Air Control Valve fault (closing) Drive cycle A:Signal missing.
P1552 - Idle Air Control Valve fault (closing) Drive cycle A:Signal out of range - below minimum.
P1553 - Idle Air Control Valve fault (closing) Drive cycle A:Signal out of range - above maximum.
P1562 - Battery supply check.
P1590 - Rough road signal implausible Drive cycle A:Signal implausible.
P1591 - Rough road signal implausible Drive cycle A:Signal out of range - below minimum.
P1592 - Rough road signal implausible Drive cycle A:Signal out of range - above maximum.
P1601 - EEPROM Fault (Checksum fault).
P1606 - EEPROM Fault (Communication fault).
P1606 - Watch dog check.
P1612 - Highside switch control cannot switch on or has S/C to ground.
P1613 - Highside switch control cannot switch off or has S/C to +12V.
P1663 - Throttle angle / Torque signal (power stage) Drive cycle A:Signal missing.
P1664 - Throttle angle / Torque signal (power stage) Drive cycle A:Signal out of range - below minimum.
P1665 - Throttle angle / Torque signal (power stage) Drive cycle A:Signal out of range - above maximum.
P1666 - Anti-Theft Alarm serial link fault Drive cycle A:Signal implausible.
P1667 - Anti-Theft Alarm serial link fault Drive cycle A:Signal out of range - below minimum.
P1668 - Anti-Theft Alarm serial link fault Drive cycle A:Signal out of range - above maximum.
P1672 - Immobiliser - incorrect code Drive cycle A:Signal implausible.
P1673 - Immobiliser - incorrect code Drive cycle A:Signal out of range - below minimum.
P1674 - Immobiliser - incorrect code Drive cycle A:Signal out of range - above maximum.
P1700 - Low Range signal implausible Drive cycle C:Signal implausible.
P1705 - High/Low range sensing.
P1776 - Transmission torque signal problem Drive cycle B:Signal implausible.
P1810 - MES1.
P1810 - MES2.
P1841 - CAN bus monitoring.
P1842 - CAN level monitoring.
P1843 - CAN timeout monitoring.
P1884 - CAN Message MD_IND invalid (FFh).
P1884 - CAN Message MD_IND invalid (flag F_TL_MES).
P1884 - CAN message MD_REIB invalid (FFh).
P1884 - CAN Message N_MOT invalid (flag F_N_MOT).
P1884 - CAN message T_MOT (Engine temp) invalid (FFh).
P1884 - CAN message V3 (road speed) invalid (FFh).
P1884 - CAN message WFPDK (DKI) invalid (FFh).

 

Interesting. Slightly different text from the RAVE, such as P1562, RAVE tells you battery is below 9 volts; this list says battery supply monitoring. Some codes on this list did not appear in RAVE, like P0562.

And some variation in the original Klingon text:

P0136 - Lambda sensor downstream catalyst bank 1 Drive cycle C:Signal implausible.


and from the RAVE:

 

this or something like it would make a good post it, rather than going back to the rave every post.

 

Over the years, I have actually found and copied 6 different Disco fault code lists, each has some differences, as an example, this one only shows 3 of the 5 MAF fault codes.
The reason I am mention this is it is good to work from a couple lists to make sure you are going in the right direction.

 

Good reference sticky, but i do agree that each list has a slight variation and one may leave out what the next includes. Always a good practice to have more than one of these lists at hand.

 

I have a 03 Land Rover Disc. that is pulling codes p1129 and p1412. Any suggestions on where I should start looking? It idles a little rough sometimes.

 

@Best4x4 Should this be sticky'd ?

 

I'll add it to the list when I get a chance