Looking for tips on Front cover install and Head gasket install
#1
Looking for tips on Front cover install and Head gasket install
Hey guys I got everything torn apart and getting ready to put it all back together this weekend. I have the Rave manual and am following it just looking for any inside tips on timing chain/gear, oil gear, oil seal, head gaskets, etc.
thanks
thanks
#2
Some of this applies to the D2
1997 Land Rover replace catalytic converter and head gaskets
This applies directly to the D2
Flickr: Landroverdude2's Photostream
1997 Land Rover replace catalytic converter and head gaskets
This applies directly to the D2
Flickr: Landroverdude2's Photostream
#4
#7
#8
#9
Has 140k on it. T stat, hoses, reservoir, and radiator replaced this past September.
Have a new belt, timing chain and gear as well as oil pump gear and sump gasket.
Have the timing gear/chain kit from AB and the head gasket kit should be here today.
Headed out to get oil, antifreeze, and p/s fluid here in a few. Think that covered most of the questions and I think I've got most of the recommendations in work. Thanks for the help.
Rob
Have a new belt, timing chain and gear as well as oil pump gear and sump gasket.
Have the timing gear/chain kit from AB and the head gasket kit should be here today.
Headed out to get oil, antifreeze, and p/s fluid here in a few. Think that covered most of the questions and I think I've got most of the recommendations in work. Thanks for the help.
Rob
#10