M+S lights flashing P0705/ other issues.
#11
Ok so i am thinking that the pump or the torques converter were not installed correctly by the PO. The PO replace a leaking o-ring behind the pump. During the reinstall of the transmission the cps wiring was smashed. I drained the trans fluid and removed the pan hoping to find a broken standpipe or something like that. however everything looked great inside. After I refilled to the correct level. I removed the bottom transmission line and started the rover. I placed the transmission in park and no fluid came out for the 30 to 45 seconds i let the rover run. What do yall think see above post i can get it to move around the yard but i have to rev it to 3k and use low on t-case.
Thread
Thread Starter
Forum
Replies
Last Post