Ok to not change out all spark plugs at once
But why would you only want to run one new plug in an engine? You stand the possibility of have an uneven running engine do to different heat ranges, gaps and wear related resistance of the other plugs.
Where can you goto buy Magnecor 8mm Ignition Wires? Louisiana here and autozone didnt show up with those ignition wires, also the sparkplugs... what type to get?
I see yall say Bosch 4+ if im reading it right, it has 4 prongs on the end correct, if switching from a regular sparkplug to that is there anything different i need to buy... or just the bosch 4+ and magnecor 8mm wire set?
I see yall say Bosch 4+ if im reading it right, it has 4 prongs on the end correct, if switching from a regular sparkplug to that is there anything different i need to buy... or just the bosch 4+ and magnecor 8mm wire set?
How toreplace Disco wires with SAI .... https://landroverforums.com/m_41479/tm.htm
I purchaced my Magnecore wires at http://www.roverconnection.com Delivered in three days.
MWmG
I purchaced my Magnecore wires at http://www.roverconnection.com Delivered in three days.
MWmG
ORIGINAL: OxyCoRover
Where can you goto buy Magnecor 8mm Ignition Wires? Louisiana here and autozone didnt show up with those ignition wires, also the sparkplugs... what type to get?
I see yall say Bosch 4+ if im reading it right, it has 4 prongs on the end correct, if switching from a regular sparkplug to that is there anything different i need to buy... or just the bosch 4+ and magnecor 8mm wire set?
Where can you goto buy Magnecor 8mm Ignition Wires? Louisiana here and autozone didnt show up with those ignition wires, also the sparkplugs... what type to get?
I see yall say Bosch 4+ if im reading it right, it has 4 prongs on the end correct, if switching from a regular sparkplug to that is there anything different i need to buy... or just the bosch 4+ and magnecor 8mm wire set?
Wow this just answered all my questions too.
I just purchased platinum +4's and was going to install them after the head gasket change, but I believe I will wait and purchase some magnecor wire's also.
Thanks again
I just purchased platinum +4's and was going to install them after the head gasket change, but I believe I will wait and purchase some magnecor wire's also.
Thanks again
There was a write up about on here 4 or 5 weeks ago about changeing out the wire with secondary air and no manifold removal, might want to start searching it out.
Thread
Thread Starter
Forum
Replies
Last Post
OffroadFrance
Off Topic
0
Jan 14, 2015 04:56 PM
rover
Freelander
6
Feb 22, 2011 04:07 PM
agapelandrover
General Range Rover Discussion - Archived
1
Nov 8, 2010 11:28 AM




