Post- Head Gasket
#23
RE: Post- Head Gasket
I had a pressure test and 2 hoses started leaking, the thermostat hose and heater hose 'massively' leaked.
I didn't realize how ballooned the hose was.
I replaced them, had the truck sitting at a pretty aggressive angle when I tried bleeding the system again, then I let it idle and it overheated.
Another thought someone gave me, is from the previous overheating and riving around with blown headgasket, maybe the cat melted?
Blocking heat from escaping and not letting the motor to cool-down, hence the white smoke also ?
On monday going to send it back to the mechanic and tell him to do a pressure check and replace the thermostat and I DONT WANT IT BACK until it's fixed ....
I didn't realize how ballooned the hose was.
I replaced them, had the truck sitting at a pretty aggressive angle when I tried bleeding the system again, then I let it idle and it overheated.
Another thought someone gave me, is from the previous overheating and riving around with blown headgasket, maybe the cat melted?
Blocking heat from escaping and not letting the motor to cool-down, hence the white smoke also ?
On monday going to send it back to the mechanic and tell him to do a pressure check and replace the thermostat and I DONT WANT IT BACK until it's fixed ....
#24
RE: Post- Head Gasket
Started it up to see what it would do, Heater was cold, drove it a bit on the highway, temp range was climbing, I floored it to get the water to circulate 'it did' , engine heated up, I pulled over and let it idle, i must have got the water to circulate cause I heard gurgling sounds from heater core, then it stopped and heater was warm, and engine stayed normal.
Went into town (about 15 miles) everything was fine. Checked water level in town 'normal in resevoir' heater still hot.
Stopped for about 20 mins...
Started it back up, and heater started circulating cold + hot depending on how much throttle im giving it...
Little steam was coming out of the hood but was burn off from me spilling antifreeze on manifold, and everything earlier..
Gonna go out in a second and check the water level and see how it's doin..
I tried looking in the dark but I might have seen antifreeze on top of the intake under that heater hose I replaced ..... but am not sure. will post again in a minute
Went into town (about 15 miles) everything was fine. Checked water level in town 'normal in resevoir' heater still hot.
Stopped for about 20 mins...
Started it back up, and heater started circulating cold + hot depending on how much throttle im giving it...
Little steam was coming out of the hood but was burn off from me spilling antifreeze on manifold, and everything earlier..
Gonna go out in a second and check the water level and see how it's doin..
I tried looking in the dark but I might have seen antifreeze on top of the intake under that heater hose I replaced ..... but am not sure. will post again in a minute
#25
RE: Post- Head Gasket
First thing I did was squeeze the upper radiator hose, and it made a squeaking sound when I did (did this in pitch black btw)
Opened the resevoir and stuck my fingers in and touched the bottom... engine was still a little warm, sitting in 45 degree weather for about 2.5 hrs ..
Opened the resevoir and stuck my fingers in and touched the bottom... engine was still a little warm, sitting in 45 degree weather for about 2.5 hrs ..
#28
RE: Post- Head Gasket
I spoke to mike yesterday before I did anything else...
There is water in the resevoir , little pool at the bottom, I just couldn't feel it in cold/dark.
It still starts fine and I see a little pool of antifreeze on the intake manifold under the hose I replaced.
Tomorrow my mechanic is gonna look at it (bumped into him at WalMart and he seems really interested in fixing it, he's just a busy guy)...
Wish me luck
There is water in the resevoir , little pool at the bottom, I just couldn't feel it in cold/dark.
It still starts fine and I see a little pool of antifreeze on the intake manifold under the hose I replaced.
Tomorrow my mechanic is gonna look at it (bumped into him at WalMart and he seems really interested in fixing it, he's just a busy guy)...
Wish me luck
#29
#30
Join Date: Feb 2007
Location: Ottawa, Ontario, Canada
Posts: 1,088
Likes: 0
Received 1 Like
on
1 Post
RE: Post- Head Gasket
You said that the hoses were leaking, and one leak was massive. Is this fixed yet, or what ???
Don't forget that the system works with pressure. Ifenough pressure is allowed to escape where the leaks are, you are not getting the performance that you should from your cooling system.
Don't forget that the system works with pressure. Ifenough pressure is allowed to escape where the leaks are, you are not getting the performance that you should from your cooling system.