Rear Bumper
#3
@PalmettoDisco Yes to the backup sensors, they are being dropped and it looks like a single connector to disconnect the sensor harness
The following users liked this post:
PalmettoDisco (11-17-2020)
#7
The following users liked this post:
Richard Gallant (11-18-2020)
#8
I bought that same bumper thru Lucky 8. It was scraped up on every corner when it arrived. Had to ask hm to file damage claim with UPS. Still waiting on my refund.
BTW, the bumper didn't fit properly Top corners on each end cap rubbed against the corner trim above the old bumper. It took quite a bit of shimming to get it decent.
It'll never fit like the old plastic did.
BTW, the bumper didn't fit properly Top corners on each end cap rubbed against the corner trim above the old bumper. It took quite a bit of shimming to get it decent.
It'll never fit like the old plastic did.
#9
@Davis31052 I suspect I may have a few issues on the right side if the inner support was hit. Most of the fit issues I have read have to do with the center support and getting that lined up right.
Sounds like you got a bumper in rough shape. Mine would have taken a courier significant effort to damage it was very well packed.
I will be adding more to this as I fit the bumper on the weekend, we are supposed to have a dryish day Saturday
Sounds like you got a bumper in rough shape. Mine would have taken a courier significant effort to damage it was very well packed.
I will be adding more to this as I fit the bumper on the weekend, we are supposed to have a dryish day Saturday
#10