Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Rear fog switch indicator light not coming on

Old Jan 1, 2022 | 08:36 PM
  #1  
jonlorio's Avatar
Thread Starter
|
4th Gear
Joined: Oct 2020
Posts: 4
Likes: 0
From: Madisonville, LA
Default Rear fog switch indicator light not coming on

Hi all. I turn the headlights on, front fogs work, rear fogs do not. The switch indicator light is not illuminating either when the headlights are on. I checked all fuses under the dash, all look good. I’ve tried swapping the r12 relay under the hood, and still no dice. Any help is appreciated
 
Reply
Old Jan 1, 2022 | 08:50 PM
  #2  
aemnky606's Avatar
Winching
Joined: Feb 2010
Posts: 554
Likes: 59
From: Burlington, NC
Default

Switch may have some green crusty’s in it. I know I had to take some of my switches apart in the D1. Not sure if they can be taken apart in a D2 but I would give it a try.
 
Reply
Old Jan 2, 2022 | 11:37 AM
  #3  
JohnZo's Avatar
Pro Wrench
Joined: Apr 2021
Posts: 1,409
Likes: 397
From: SE Washington State
Default

Did you try shifting into reverse?
 
Reply
Old Jan 2, 2022 | 12:56 PM
  #4  
jonlorio's Avatar
Thread Starter
|
4th Gear
Joined: Oct 2020
Posts: 4
Likes: 0
From: Madisonville, LA
Default

Originally Posted by JohnZo
Did you try shifting into reverse?
yes, and that didn’t do it
 
Reply
Old Jan 2, 2022 | 01:40 PM
  #5  
aemnky606's Avatar
Winching
Joined: Feb 2010
Posts: 554
Likes: 59
From: Burlington, NC
Default

Have they ever worked? If not the BCM may need to be programmed to enable them.
 
Reply
Old Jan 2, 2022 | 01:47 PM
  #6  
aemnky606's Avatar
Winching
Joined: Feb 2010
Posts: 554
Likes: 59
From: Burlington, NC
Default

Just found this:



 
Reply
Old Jan 2, 2022 | 02:07 PM
  #7  
jonlorio's Avatar
Thread Starter
|
4th Gear
Joined: Oct 2020
Posts: 4
Likes: 0
From: Madisonville, LA
Default

Originally Posted by JohnZo
Did you try shifting into reverse?
yes, and that didn’t do it
 
Reply
Old Jan 2, 2022 | 02:08 PM
  #8  
jonlorio's Avatar
Thread Starter
|
4th Gear
Joined: Oct 2020
Posts: 4
Likes: 0
From: Madisonville, LA
Default

Originally Posted by aemnky606
Have they ever worked? If not the BCM may need to be programmed to enable them.
they did work, then all of sudden they don’t.
 
Reply
Old Jan 2, 2022 | 03:19 PM
  #9  
aemnky606's Avatar
Winching
Joined: Feb 2010
Posts: 554
Likes: 59
From: Burlington, NC
Default

Take a look at the diagram above I posted looks like several fuses. There is a 40a and 10a in the engine bay and 2 10a in the cab. #4 & 29.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sierra88
Discovery II
16
Apr 15, 2018 04:37 PM
Chrjones
Discovery II
7
Aug 6, 2016 03:43 PM
Southern Bawb
Discovery II
10
May 4, 2015 08:04 PM
Alex_M
Discovery II
3
Jan 12, 2015 09:50 PM
CUpgt
Discovery I
5
Oct 21, 2012 10:10 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:34 AM.